ISL43L121IR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Packaging | Bulk |
| Published | 2001 |
| JESD-609 Code | e0 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| Resistance | 250mOhm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Output | SEPARATE OUTPUT |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-N8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 1.8/3V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 1.65V |
| Number of Channels | 2 |
| Analog IC - Other Type | SPDT |
| Operating Supply Current | 30nA |
| Number of Bits | 2 |
| Throw Configuration | SPST |
| Supply Type | Single |
| Off-state Isolation-Nom | 62 dB |
| On-state Resistance Match-Nom | 0.005Ohm |
| Switch-on Time-Max | 40ns |
| Switch-off Time-Max | 35ns |
| Normal Position | NC |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ISL43L121IR Overview
This high-reliability packaging method uses advanced packaging methods Bulk. In total, there are 8 terminations. This electronic part offers high-quality output due to its 2 channels. Powered by a 1.8V voltage supply, the electrical part should be switched on and run. A total of 8 pins are injected into the electrical part body. The internal resistance of this digital multiplexer is 250mOhm. There is a standard Multiplexer or Switches analogue multiplexer here. Digital switch that provides Single power at a cost-effective price. The analogue multiplexer could operate on 30nA current. This product is integrated with an analog integrated circuit (IC) of type SPDT. This analog switch ic utilizes SEPARATE OUTPUT output. In an environment with a temperature higher than 85°C, the digital switches should not operate. Its conductivity is 2-bit. To power the multiplexer ics, the voltage must be set at 1.65V.
ISL43L121IR Features
2 Channels
30nA Supply Current
2-Bit
ISL43L121IR Applications
There are a lot of Intersil (Renesas Electronics America) ISL43L121IR Analog Switches & Multiplexers ICs applications.
- SDH/SONET multiplexers
- Communication systems
- Avionics test equipment
- Communications systems
- Avionics
- Transmit
- Intelligent PBX
- Relay Replacement
- FTTH
- Video signal routing
