ISL43L121IU
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-G8 |
| Qualification Status | COMMERCIAL |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Analog IC - Other Type | SPDT |
| On-State Resistance (Max) | 250mOhm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 62 dB |
| Current - Leakage (IS(off)) (Max) | 3nA |
| Channel Capacitance (CS(off), CD(off)) | 182pF 182pF |
| On-state Resistance Match-Nom | 0.005Ohm |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 25ns, 25ns |
| Charge Injection | -125pC |
| Channel-to-Channel Matching (ΔRon) | 5m Ω |
| Crosstalk | -94dB @ 100kHz |
| Switch-on Time-Max | 40ns |
| Switch-off Time-Max | 35ns |
| Voltage - Supply, Single (V+) | 1.65V~3.6V |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | Non-RoHS Compliant |
ISL43L121IU Overview
The electronic part can be shipped overseas conveniently because it is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). High reliability is ensured by the advanced packaging method Tube. Mounted in Surface Mount is this multiplexer. Multiplexer and demultiplexer circuits have a number 1:1. The operating temperature is extended to around -40°C~85°C TA. Totally, there are 8 terminations. High-quality output is provided by the electronic component's 2 channels. An 1.8V voltage supply should allow the electrical part to be turned on and run. A total of 8 pins are injected into the body of the electronic part. The analog switch ics are built using SPST - NC switching circuits. 2 circuits are used in this analogue multiplexer. This analog switch requires a voltage of 1.65V~3.6V to drain from a single voltage supply. There is an integrated analog IC SPDT in the module.
ISL43L121IU Features
2 Channels
Switch Circuit: SPST - NC
ISL43L121IU Applications
There are a lot of Rochester Electronics, LLC ISL43L121IU Analog Switches & Multiplexers ICs applications.
- Medical systems
- Communication systems
- Industrial control systems
- Communication systems
- Voice over IP/DSL – Integrated Access Devices, Smart
- Battery Powered Instruments
- Digital Cross-Connects
- Cable PC
- Transmit
- Channel Banks
