ISL54060IRTZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Number of Pins | 10 |
| Published | 2001 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 10 |
| Resistance | 520mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Output | SEPARATE OUTPUT |
| Power Supplies | 1.8/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 6.5V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 8nA |
| Max Supply Current | 100nA |
| Throw Configuration | SPST |
| Turn On Delay Time | 35 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 10 ns |
| Off-state Isolation-Nom | 68 dB |
| On-state Resistance Match-Nom | 0.01Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Normal Position | NO |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
ISL54060IRTZ Overview
In total, 10 terminations have occurred. A electrical component with 1 channels is capable of high-quality output. When a voltage supply of 3V is used, the electronic component should be turned on and run. It has an internal resistance of 520mOhm. For details about the functions of 10 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. A voltage higher than 6.5V should not normally be supplied to the switches. Analog switch ics with Single supply type are cost-effective. The lowest voltage the electronic part should receive is 1.8V. 8nA current would be enough for this multiplexer to operate. The switch multiplexer may be damaged if it is exposed to voltage greater than 100nA. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. It is not recommended to operate the switches in an environment with a temperature higher than 85°C.
ISL54060IRTZ Features
1 Channels
8nA Supply Current
ISL54060IRTZ Applications
There are a lot of Intersil (Renesas Electronics America) ISL54060IRTZ Analog Switches & Multiplexers ICs applications.
- T1/E1 Terminals
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Routers
- Cable PC
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Avionics test equipment
- Fiber to the Home
- High-Voltage
- Residential Gateways, Home Gateway/Router
- USB 1.1 signal switching circuits
