ISL84543IBZ
| Parameters | |
|---|---|
| Turn On Delay Time | 100 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 75 ns |
| Off-state Isolation-Nom | 76 dB |
| On-state Resistance Match-Nom | 0.8Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 50ns |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Packaging | Bulk |
| Published | 2001 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| Resistance | 60Ohm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Output | SEPARATE OUTPUT |
| Power Supplies | 3.3/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 100pA |
| Max Supply Current | 1μA |
| Number of Bits | 2 |
| Throw Configuration | SPST |
ISL84543IBZ Overview
Presented in SOIC, this electrical component is convenient for overseas shipping. High reliability is provided by advanced packaging method Bulk. A total of 8 terminations have been recorded. This electronic part offers high-quality output due to its 1 channels. When a voltage supply of 3.3V is used, the electronic component should be turned on and run. A 60Ohm internal resistance characterizes this multiplexer. For functions related to 8 pins, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. normally, users should not supply switches with voltages higher than 12V. A cost-effective Single supply type analogue multiplexer. 2.7V is the lowest voltage that should be fed to the electronic electronic part. This multiplexer would work with 100pA current. Put voltage above 1μA on the multiplexer to cause damage. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. Temperatures higher than 85°C are not recommended for operation of the analogue multiplexer. 2-bit conductivity is possible.
ISL84543IBZ Features
1 Channels
100pA Supply Current
2-Bit
ISL84543IBZ Applications
There are a lot of Intersil (Renesas Electronics America) ISL84543IBZ Analog Switches & Multiplexers ICs applications.
- SONET
- Modems
- Channelized and Unchannelized DS3 applications
- Video signal routing
- Fiber to the Home
- Battery Powered Systems
- Avionics
- PBX interfaces
- PCMCIA cards
- Microprocessor controlled systems
