Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
48-LQFP |
Number of Pins |
48 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tray |
Published |
2000 |
Series |
ispClock™ |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
48 |
ECCN Code |
EAR99 |
Type |
Clock Generator, Fanout Distribution, Zero Delay Buffer |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Clock Drivers |
Voltage - Supply |
3V~3.6V |
Terminal Position |
QUAD |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
ISPPAC-CLK53 |
Output |
eHSTL, HSTL, LVCMOS, LVTTL, SSTL |
Pin Count |
48 |
Operating Supply Voltage |
3.3V |
Supply Voltage-Max (Vsup) |
3.6V |
Supply Voltage-Min (Vsup) |
3V |
Number of Circuits |
1 |
Nominal Supply Current |
150mA |
Frequency (Max) |
267MHz |
Family |
5308 |
Input |
HSTL, LVCMOS, LVDS, LVPECL, LVTTL, SSTL |
Ratio - Input:Output |
2:8 |
PLL |
Yes with Bypass |
Differential - Input:Output |
Yes/No |
fmax-Min |
267 MHz |
Length |
7mm |
Width |
7mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
ISPPAC-CLK5308S-01TN48I Overview
The Tray method is used for packaging clock ICs. The 48-LQFP package includes this clock generator. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. As a result of this, we can find 48 terminations. This electronic frequency generator requires a voltage of 3.3V. This clock generator receives its inputs from HSTL, LVCMOS, LVDS, LVPECL, LVTTL, SSTL, which is designed to be the clock source. 1 circuits are implemented to access the electronic component's full performance. Providing a maximum frequency of 267MHz, this clock-based RF synthesizer is suitable for a variety of applications. This component can be conveniently installed on the panel thanks to the Surface Mount. Clock PLL is capable of receiving a maximum of 3.6V as a supply voltage. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 3V. Clock PLL works with 3V~3.6V supply voltage provided. By calculating the test statistics, -40°C~85°C is the appropriate ambient temperature. A frequency synthesizer which is compatible with the eHSTL, HSTL, LVCMOS, LVTTL, SSTL logic levels is presented here. It is possible to classify this electronic component as a Clock Generator, Fanout Distribution, Zero Delay Buffer. This clock-generating IC is a 48-bit device designed explicitly for microprocessors. This part number is related to its related electronic parts. There are 48 pins that are available on the clock PLL. There is a maximum supply voltage of 3.3V that frequency generators can handle. As such, it is often referred to as a kind of Clock Drivers clock PLL. It is part of the ispClock? series of electronic components. You can find similar electronic components by searching for the 5308 family.
ISPPAC-CLK5308S-01TN48I Features
Available in the 48-LQFP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
ISPPAC-CLK5308S-01TN48I Applications
There are a lot of Lattice Semiconductor Corporation ISPPAC-CLK5308S-01TN48I Clock Generators applications.
- Automatic test equipment
- Radio receivers
- Modems
- Wi-Fi routers
- Reference signals to RF systems
- Mobile telephones
- Digital HDTV systems
- Cell phones
- Signal frequency synthesis circuits
- Small signal recovery