ISPPAC-CLK5610AV-01TN48C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tray |
| Published | 2000 |
| Series | ispClock™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Clock Drivers |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 10MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ISPPAC-CLK5610A |
| Output | EHSTL, HSTL, LVCMOS, LVDS, LVPECL, LVTTL, SSTL |
| Pin Count | 48 |
| Number of Outputs | 10 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 7mA |
| Frequency (Max) | 400MHz |
| Family | 5600 |
| Input | HSTL, LVCMOS, LVDS, LVPECL, LVTTL, SSTL |
| Ratio - Input:Output | 1:10 |
| Logic IC Type | PLL BASED CLOCK DRIVER |
| PLL | Yes with Bypass |
| Differential - Input:Output | Yes/Yes |
| Propagation Delay (tpd) | 8.8 ns |
| Divider/Multiplier | Yes/No |
| fmax-Min | 400 MHz |
| Same Edge Skew-Max (tskwd) | 0.05 ns |
| Length | 7mm |
| Width | 7mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ISPPAC-CLK5610AV-01TN48C Overview
As a clock IC, it is packaged by the Tray method. The 48-LQFP package embeds this Clock PLL. This clock generator ic can sustain a maximum temperature of 260 during reflowing. As a result, frequency synthesizers can be found to contain 48 terminations. The clock generator ic should be grounded with a voltage of 3.3V. It is designed that the Clock PLL's input should be HSTL, LVCMOS, LVDS, LVPECL, LVTTL, SSTL. For a full understanding of the electronic part's performance, 1 circuits are implemented. There is a maximum frequency of 400MHz Max with this clock-based frequency generator. Surface Mount-slots make it easy to mount this electronic component on panels. This clock generator would require a maximum supply voltage of 3.6V. The supply voltage (Vsup) should be kept above 3V for normal operation. Clock generator ic works with 3V~3.6V. Based on test statistics, ambient temperature should be set at 0°C~70°C. EHSTL, HSTL, LVCMOS, LVDS, LVPECL, LVTTL, SSTL logic levels are supported by this RF synthesizer. This clock-generating IC is a 48-bit device designed explicitly for microprocessors. According to the base part number, its related parts can be founded. There are 48 pins that are available on the clock PLL. Supply voltage 3.3V is what clock generator can handle. As such, it is often referred to as a kind of Clock Drivers clock PLL. There is an electronic part in this series that belongs to the ispClock? family. Clock PLL is facilitated with 10 signal outputs to magnify output frequency as high as possible. Low timing skew is offered by this RF synthesizer at maximum 0.05 ns. You can find similar electronic components by searching for the 5600 family. Logic circuits containing this analog clock generator are commonly used in PLL BASED CLOCK DRIVER logic. At frequencies of 10MHz, RF synthesizer achieves high efficiency.
ISPPAC-CLK5610AV-01TN48C Features
Available in the 48-LQFP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
ISPPAC-CLK5610AV-01TN48C Applications
There are a lot of Lattice Semiconductor Corporation ISPPAC-CLK5610AV-01TN48C Clock Generators applications.
- Simple clock clean-up circuits
- Deep space exploration
- Electronic equipment
- Wireless handsets
- Radar
- Satellite receivers
- Walkie-talkies
- Signal analyzer
- Aerospace and defense
- Camera systems
