KA311
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | DIP |
| Number of Pins | 8 |
| JESD-609 Code | e3 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Comparators |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 5V |
| Power Dissipation-Max | 500mW |
| Nominal Supply Current | 7.5mA |
| Max Supply Current | 7.5mA |
| Current - Output | 200pA |
| Quiescent Current | 7.5mA |
| Response Time | 200 ns |
| Current - Input Bias | 250nA |
| Output Current per Channel | 200pA |
| Input Offset Voltage (Vos) | 7.5mV |
| Average Bias Current-Max (IIB) | 0.3μA |
| Bias Current-Max (IIB) @25C | 0.25μA |
| Length | 9.2mm |
| Width | 7.62mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
KA311 Overview
To facilitate transportation, it comes packaged in DIP .There are 8 terminals on the comparator.The component belongs to the Comparators family of electrical components.A comparator is capable of completing a variety of demanding tasks when supplied with 15V voltage.A comparator of this type is typically of type General Purpose .The device is equipped with 8 pins.The comparator consists of 8 pins.There is a quiescent current of 7.5mA in this comparator.A Through Hole is provided for mounting it onto a PCB or another board.Electronic comparator is recommended that the nominal supply current be 7.5mA in order to use the device normally.If the current supply exceeds 7.5mA , the comparator could malfunction.Comparator electronics is not recommended to operate the system at a temperature above 70°C .Comparator electronics cannot be used at a temperature below 0°C .There is a maximum voltage supply on the comparator of 30V .A minimum supply voltage of 5V is permitted for this comparator.As a result, 1 channels work together to maintain the quality of the output.The output current of this device is rated 200pA .
KA311 Features
General Purpose IC
Quiescent Current: 7.5mA
KA311 Applications
There are a lot of Fairchild (ON Semiconductor) KA311 linear comparators applications.
- High-Speed Differential Line Receiver
- Wireless Base Stations
- Set Top Boxes
- Notebooks and PDAs
- Laptop Computers
- Threshold Detectors
- Analog front end
- Battery-Powered Electronics
- System control and monitoring
- Security Detection Systems
