Parameters |
Number of Pins |
3 |
Housing Material |
Stainless Steel |
Operating Temperature |
0°C~55°C |
Published |
1998 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
Not Applicable |
Voltage - Supply |
10V~30V |
Ingress Protection |
IP67 |
Frequency |
250Hz |
Max Output Current |
100mA |
Output Configuration |
PNP - Light-ON |
Output Current |
100mA |
Response Time |
3ms |
Sensing Distance |
0.000 ~ 1.969 (0mm ~ 50mm) |
Sensing Method |
Diffuse |
Max Supply Voltage (DC) |
30V |
Connection Method |
Connector, M8 |
Light Source |
Yellow LED |
Min Supply Voltage (DC) |
10V |
RoHS Status |
RoHS Compliant |
KT11-50/25/98A/103 Overview
It is recommended that the photoelectric sensor is set at 0°C~55°C to ensure reliable performance. It's important that 10V~30V is applied to the circuit or system for these components to work. Ideally, photoelectric sensors should respond within 3ms. The photoelectric sensor must have the 3 pins connected to work properly. Photoelectric sensors must have an output current of 100mA in order to operate. Photoelectric sensors can handle voltages up to 30V in DC circuits without causing damage. It is possible to operate this photoelectric sensor at a voltage as low as possible, for example at zero volts. It is capable of working with photoelectric sensors if the output current is 100mA.
KT11-50/25/98A/103 Features
Sensing Distance: 0.000 ~ 1.969 (0mm ~ 50mm)
3 pins
Response Time: 3ms
Operating Temperature: 0°C~55°C
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
KT11-50/25/98A/103 Applications
There are a lot of Pepperl+Fuchs, Inc. KT11-50/25/98A/103 Photoelectric Sensors applications.
- Pharmaceutical industry
- Entrance and gate
- Measuring distance
- Monitoring bigger areas for objects with light grids
- Contrast sensors
- Logistics and materials handling
- Automotive industry
- Mechanical engineering
- Checking objects on production lines or conveyors
- Luminescence sensors