L6205N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | -25°C~125°C TJ |
| Packaging | Tube |
| Series | STSPIN L62 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 300mOhm |
| Terminal Finish | Tin (Sn) |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | BiCDMOS |
| Voltage - Supply | 8V~52V |
| Terminal Position | DUAL |
| Supply Voltage | 48V |
| Base Part Number | L6205 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 4 |
| Output Voltage | 52V |
| Max Output Current | 5.6A |
| Operating Supply Voltage | 48V |
| Supply Voltage-Min (Vsup) | 8V |
| Number of Channels | 2 |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Nominal Supply Current | 10mA |
| Output Configuration | Half Bridge (4) |
| Output Current per Channel | 2.8A |
| Collector Emitter Voltage (VCEO) | 52V |
| Max Collector Current | 2.8A |
| Voltage - Load | 8V~52V |
| Switching Frequency | 100kHz |
| Motor Type | Brushed |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Height | 5.1mm |
| Length | 24.8mm |
| Width | 7.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6205N Overview
The package contains [0].20-DIP (0.300, 7.62mm)cases are included with the part.A mounting position of Through Holeis recommended for the part.Drivers controllers is fDrivers controllersting for the component connected in General Purpose.Drivers controllers is capable of supplying 8V~52V volts.Regarding the operating temperature, it is in the range of -25°C~125°C TJ°C.This motor type can be categorized as Brushed DC.The part has 20terminations available.There is the option of applying the voltage to the load at the rate of 8V~52V.Drivers controllers is recommended that this amplifier be run at 48V.Through Holeis its recommended mounting method.This device utilizes the STEPPER MOTOR CONTROLLERanalog integrated circuit.This can be determined by looking at the L6205 part number.20pins are available on the device.The Motion Control Electronicsseries contains it.Drivers controllers is possible to access 4outputs.A supply voltage of 48Vis required to operate this driver.In this case, the output voltage is maintained at 52V.In this case, the output voltage is kept at STSPIN L62 volts.As a result, we can recognize that the motor type is Brushed.In order to satisfy the requirements of operation, the maximum output current reaches [0].2channels are available.
L6205N Features
Applications : General Purpose
Load voltage across the chip 8V~52V
base on L6205 number
designed with 4 outputs
Motor Type classified as Brushed
L6205N Applications
There are a lot of STMicroelectronics L6205N motor drivers applications.
- Matrix LED dimmers
- Dome
- Hidden coves in high-end residential settings
- High brightness LED lighting
- Hazardous application
- Emergency lighting
- Brake lights
- Industrial high-bay lights
- LED ballasts
- Arena lighting
