L6225D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -25°C~125°C TJ |
| Packaging | Tube |
| Series | STSPIN L62 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 730mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | BiCDMOS |
| Voltage - Supply | 8V~52V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 48V |
| Base Part Number | L6225 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 4 |
| Output Voltage | 52V |
| Max Output Current | 2.8A |
| Operating Supply Voltage | 48V |
| Supply Voltage-Min (Vsup) | 8V |
| Number of Channels | 2 |
| Interface | Parallel |
| Analog IC - Other Type | BRUSHLESS DC MOTOR CONTROLLER |
| Nominal Supply Current | 10mA |
| Output Configuration | Half Bridge (4) |
| Current - Output | 4A |
| Output Current per Channel | 1.4A |
| Collector Emitter Voltage (VCEO) | 52V |
| Max Collector Current | 1.4A |
| Voltage - Load | 8V~52V |
| Switching Frequency | 100kHz |
| Motor Type | Brushed |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Height | 2.35mm |
| Length | 13mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6225D Overview
The design includes a package of type [0].This part is packaged with a case of [0].To mount the part by [0], it is recommended that you do so.I believe it is suitable for the component connected to General Purpose.8V~52V volts can be supplied by the device.With regard to operating temperature, it ranges -25°C~125°C TJ. A motor of this type can be categorized as Brushed DC.A total of 20terminations are available in this part.At a rate of [0], voltage can be applied to the load.Drivers controllers is very important to keep in mind that this amplifier should be operated at 48V.Surface Mountis its recommended mounting method.Set the part's output current to 4A.This device utilizes the BRUSHLESS DC MOTOR CONTROLLERanalog integrated circuit.Drivers controllers is based on the L6225 part number.20pins are used in its design.Drivers controllers belongs to the Motion Control Electronics series.Drivers controllers is possible to access 4outputs.There is 48V supply voltage required for this driver.Continually maintains the output voltage at 52V.STSPIN L62 is the main series of the part.As a result, we can recognize that the motor type is Brushed.The maximum output current reaches 2.8Ato meet the operating requirements.On it, there are 2 channels.
L6225D Features
Applications : General Purpose
Load voltage across the chip 8V~52V
base on L6225 number
designed with 4 outputs
Motor Type classified as Brushed
L6225D Applications
There are a lot of STMicroelectronics L6225D motor drivers applications.
- Building technology
- Lighting for health and wellbeing
- Dome
- Mobile phone display backlight and key light driving
- Indicator circuit
- Indicator
- High brightness LED lighting
- Camcorders
- Automotive instrumentation
- RGB and monochromatic LED drivers for signage and traffic signals
