L6235PD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-BSSOP (0.433, 11.00mm Width) Exposed Pad |
| Number of Pins | 36 |
| Operating Temperature | -25°C~125°C TJ |
| Packaging | Tube |
| Series | STSPIN L62 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | DMOS |
| Voltage - Supply | 12V~52V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 48V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | L6235 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Output Voltage | 52V |
| Operating Supply Voltage | 42V |
| Supply Voltage-Min (Vsup) | 8V |
| Number of Channels | 3 |
| Interface | Parallel |
| Analog IC - Other Type | BRUSHLESS DC MOTOR CONTROLLER |
| Operating Supply Current | 6mA |
| Output Configuration | Half Bridge (3) |
| Output Current-Max | 5.6A |
| Reference Voltage | 5V |
| Collector Emitter Voltage (VCEO) | 52V |
| Max Collector Current | 2.8A |
| Voltage - Load | 12V~52V |
| Switching Frequency | 100kHz |
| Motor Type | Brushless DC (BLDC) |
| Motor Type - AC, DC | Brushless DC (BLDC) |
| Height | 3.3mm |
| Length | 16mm |
| Width | 11.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6235PD Overview
The package contains [0].36-BSSOP (0.433, 11.00mm Width) Exposed Padcases are included with the part.Surface Mountshould be used for mounting the part.In this case, it is appropriate for the component connected to General Purpose.12V~52V volts can be supplied by the device.With regard to operating temperature, it ranges -25°C~125°C TJ. Motors can be classified as Brushless DC (BLDC).There are 36 terminations available on this part.There is the option of applying the voltage to the load at the rate of 12V~52V.Please take in mind that this amplifier should be run at 48V.Surface Mountis the recommended mounting method.A BRUSHLESS DC MOTOR CONTROLLERanalog IC is employed in this device.Based on the L6235part number, it is found.36pins are present on the device.The item belongs to the Motion Control Electronics series.Currently, there are 1 outputs available.This driver operates from a supply voltage of 42V.In this case, 52Vis maintained as the output voltage.Continually maintains the output voltage at STSPIN L62.The motor type can be identified as Brushless DC (BLDC).Controller ic operates on a supply current of 6mA.On this device, there are 3channels.
L6235PD Features
Applications : General Purpose
Load voltage across the chip 12V~52V
base on L6235 number
designed with 1 outputs
Motor Type classified as Brushless DC (BLDC)
L6235PD Applications
There are a lot of STMicroelectronics L6235PD motor drivers applications.
- Monitoring the energy that the luminaire uses
- Indicator
- Digital still cameras
- Daytime running lights (DRLs)
- Alternative to HID lights
- CHMSL (center high-mount stop lamps)
- Scanning equipment
- LCD displays
- Side marker lights
- Hospitality buildings
