L9349TR-LF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-PowerSOIC (0.433, 11.00mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 300mOhm |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 1.27mm |
| Base Part Number | L9349 |
| Pin Count | 20 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 5A |
| Supply Voltage-Max (Vsup) | 32V |
| Interface | On/Off |
| Current - Output (Max) | 3A 5A |
| Nominal Supply Current | 8mA |
| Output Configuration | Low Side |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 8mA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~32V |
| Driver Number of Bits | 4 |
| Fault Protection | Open Load Detect, Over Temperature |
| Turn On Time | 25 µs |
| Rds On (Typ) | 200m Ω, 300m Ω |
| Turn Off Time | 30 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 3.6mm |
| Length | 15.9mm |
| Width | 11mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
L9349TR-LF Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).It's included in the 20-PowerSOIC (0.433, 11.00mm Width) package.Surface Mount is the mounting type of the LED driver.General Purpose is the switch type that it owns.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.There is a default setting of 4 for output.It uses a supply voltage of Not Required to operate.There is a maximum output voltage of N-Channel volts.Features of the lighting driver are Status Flag.The L9349 family consists of this type.A total of 20 terminations have been found in it.20 pins are used for operation.The LED driver has 1 functions.Its maximum output voltage is 3A 5AV.To comply with the operation criteria, the maximum output current is reduced to 5A.Supply voltages of 12V allow for high efficiency.This lighting driver is mounted in the way of Surface Mount.In total, it has 20 pins.Lighting drivers with 300mOhm resistance are used.As a result, the output current is set to 3A.It is self-contained in an econtainer with a capacity of Peripheral Drivers.The LED driver is configured with a maximum supply voltage of 32V (Vsup).This system has a maximum current requirement of 8mA.
L9349TR-LF Features
Supplied from 12V
Resistance of 300mOhm
L9349TR-LF Applications
There are a lot of STMicroelectronics L9349TR-LF Power Switches ICs applications.
- Portable Devices
- HDD and SSD
- Hot Swap
- Solid-State Drives
- Storage (HDDs, SSDs)
- Hot Swaps
- PC Cards
- Mobile Communication Devices
- PC Card Hot Swap
- Storage Drives
