Parameters |
Switch Type |
Relay, Solenoid Driver |
Output Current per Channel |
750mA |
Ratio - Input:Output |
1:8 |
Voltage - Load |
4.5V~5.5V |
Turn On Time |
10 μs |
Rds On (Typ) |
550m Ω |
Turn Off Time |
10 μs |
Built-in Protections |
TRANSIENT; OVER CURRENT |
Height Seated (Max) |
3.6mm |
Length |
15.9mm |
Width |
11mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SOIC (0.295, 7.50mm Width) Exposed Pad |
Number of Pins |
20 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tape & Reel (TR) |
Feature |
Status Flag |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Resistance |
530mOhm |
Technology |
BCD |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
1.27mm |
Base Part Number |
L9822 |
Pin Count |
20 |
Number of Outputs |
8 |
Operating Supply Voltage |
5.25V |
Supply Voltage-Max (Vsup) |
5.5V |
Interface |
SPI |
Current - Output (Max) |
500mA |
Output Configuration |
Low Side |
L9822N013TR Overview
The LED driver's packaged as a Tape & Reel (TR).There is a 20-SOIC (0.295, 7.50mm Width) Exposed Pad package that includes it.In this case, the LED driving board is mounted as Surface Mount.It owns Relay, Solenoid Driver switch type.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.It is possible to use 8 outputs in the lighting driver.This LED driving board is equipped with Status Flag features in order for it to be useful.It is part of the L9822 family of LED drivers.It consists of 20 terminations in total.During operation, the 20 pins are used.The LED driver has 1 functions.The maximum output of the LED driving board is 500mAV.Supply voltages of 5V allow for high efficiency.The LED driving board is mounted in the way of Surface Mount.20 pins are equipped with it.In this LED driving board, there is 530mOhm resistance.This LED driver is configured to have a maximum supply voltage of 5.5V (Vsup).Optimal efficiency requires a voltage of 5.25V.
L9822N013TR Features
Supplied from 5V
Resistance of 530mOhm
L9822N013TR Applications
There are a lot of STMicroelectronics L9822N013TR Power Switches ICs applications.
- USB Power Distribution
- Portable GPS Device
- Solid State Drivers
- Wearable Devices
- Solid-State Drives
- Various applications equipped with buttons
- Smart Phones, Feature Phones
- Low Voltage I/O System Power
- Set-Top Boxes
- Telecom and Network Systems