LB11660FV-TLM-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-LSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -30°C~90°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e6 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Terminal Finish | Tin/Bismuth (Sn/Bi) |
| Applications | Fan Motor Driver |
| Additional Feature | ALSO OPERATES IN 3 TO 15V SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Technology | Bipolar |
| Voltage - Supply | 4V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Qualification Status | Not Qualified |
| Output Voltage | 20V |
| Power Supplies | 12V |
| Supply Voltage-Min (Vsup) | 4V |
| Interface | Parallel, PWM |
| Analog IC - Other Type | BRUSHLESS DC MOTOR CONTROLLER |
| Output Configuration | High Side (2) |
| Power Dissipation | 800mW |
| Logic Function | AND |
| Supply Current-Max (Isup) | 12mA |
| Collector Emitter Voltage (VCEO) | 15V |
| Max Collector Current | 1.5A |
| Voltage - Load | 3V~15V |
| Switching Frequency | 23kHz |
| Motor Type | Brushless DC (BLDC) |
| Motor Type - AC, DC | Brushless DC (BLDC) |
| Height | 1.3mm |
| Length | 5.2mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LB11660FV-TLM-E Overview
There is a Tape & Reel (TR)package included in the design.This part is packaged with a case of [0].The part should be mounted by Surface Mount.I believe it would be suitable for the component connected to Fan Motor Driver.The device is capable of supplying a voltage of 4V~15V volts.The operating temperature ranges from -30°C~90°C TAto -30°C~90°C TA.A motor of this type can be categorized as Brushless DC (BLDC).The part supports 16terminations.If the voltage is applied to the load at the rate of [0], the load will be affected.Drivers controllers is important to note that this amplifier should be operated at the 12Vsetting.Ideally, it should be mounted in the Surface Mountposition.A BRUSHLESS DC MOTOR CONTROLLERanalog integrated circuit is employed in the device.16 pins are provided for its design.Drivers controllers belongs to the Motion Control Electronics series.A voltage of 20Vis maintained at the output.A motor type of Brushless DC (BLDC)can be recognized.In addition to this, it is also characterized by ALSO OPERATES IN 3 TO 15V SUPPLY.
LB11660FV-TLM-E Features
Applications : Fan Motor Driver
Load voltage across the chip 3V~15V
Motor Type classified as Brushless DC (BLDC)
Additional Feature: ALSO OPERATES IN 3 TO 15V SUPPLY
LB11660FV-TLM-E Applications
There are a lot of ON Semiconductor LB11660FV-TLM-E motor drivers applications.
- Step-up or step-down driver topologies
- A cross between entertainment
- Horticultural lighting
- Landscape lighting
- Indicator circuit
- Lighting for health and wellbeing
- drivers for outdoor application
- Side marker lights
- Telltale lights
- Lighting for the ambience of tunability
