LB11899J-TRM-E
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LSSOP (0.220, 5.60mm Width) Exposed Pad |
| Operating Temperature | -20°C~75°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| JESD-609 Code | e6 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Tin/Bismuth (Sn/Bi) |
| Applications | General Purpose |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Technology | Bipolar |
| Voltage - Supply | 4V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| JESD-30 Code | R-PDSO-G44 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 512V |
| Supply Voltage-Min (Vsup) | 4V |
| Interface | Parallel, PWM |
| Analog IC - Other Type | DISK DRIVE MOTOR CONTROLLER |
| Output Configuration | Half Bridge (8) |
| Current - Output | 200mA |
| Logic Function | AND |
| Supply Current-Max (Isup) | 25mA |
| Voltage - Load | 8V~16V 8V~28V |
| Motor Type - AC, DC | Brushless DC (BLDC), Brushed DC |
| Height Seated (Max) | 1.7mm |
| Length | 15mm |
| Width | 5.6mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LB11899J-TRM-E Overview
The design contains a Tape & Reel (TR)package.A 44-LSSOP (0.220, 5.60mm Width) Exposed Padcase is included with the part.Surface Mountshould be used for mounting the part.As a result, it is appropriate for the component connected to General Purpose.The device can supply 4V~6V volts.This device operates at a temperature of -20°C~75°C TA.A motor of this type can be categorized as Brushless DC (BLDC), Brushed DC.The part supports 44terminations.You can apply voltage at 8V~16V 8V~28Vto the load.Drivers controllers is very important to keep in mind that this amplifier should be operated at 5V.The recommended mounting method is Surface Mount.The output current should be kept at 200mA for the part.A DISK DRIVE MOTOR CONTROLLERanalog integrated circuit is used in the device.Drivers controllers belongs to Motion Control Electronics series.
LB11899J-TRM-E Features
Applications : General Purpose
Load voltage across the chip 8V~16V 8V~28V
LB11899J-TRM-E Applications
There are a lot of ON Semiconductor LB11899J-TRM-E motor drivers applications.
- PDAs
- Indicator circuit
- parking lights
- High brightness LED lighting
- Outdoor area lights
- Turn signals
- LED bias
- Monitoring the energy that the luminaire uses
- Automotive applications
- Tunnel lights
