LB1940T-TLM-H
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 20 |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e6 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Terminal Finish | Tin/Bismuth (Sn/Bi) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -20°C |
| Subcategory | Motion Control Electronics |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 20 |
| Number of Outputs | 2 |
| Output Voltage | 10.5V |
| Power Supplies | 35V |
| Temperature Grade | OTHER |
| Max Supply Voltage | 6.5V |
| Min Supply Voltage | 1.9V |
| Nominal Supply Current | 400mA |
| Output Current | 400mA |
| Halogen Free | Halogen Free |
| Supply Current-Max (Isup) | 7mA |
| Collector Emitter Voltage (VCEO) | 7.5V |
| Max Collector Current | 400mA |
| Motor Type | Stepper |
| Height | 1mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LB1940T-TLM-H Overview
In order to package H bridge, Tape & Reel (TR) is used.H bridge is provided in the TSSOP package for the sake of cost savings.On PCBs, Surface Mount mounts H gate.Transmission lines are terminated with 20 terminations with the H bridge that matches their characteristic impedance.Signal interfaces include 20 pins that serve as pronged contacts.To operate H bridge circuit, a voltage supply of 5V is required.The output and power supply pins are flowing wH-bridgeh current 400mA.This bridge driver functions in part thanks to the 20 pins working together.The output of this Hbridge is 2.This H bridge motor driver falls under the subcategory of Motion Control Electronics. It is similar to other parts within that category.The voltage released by the Hbridge is 10.5V.Electricity from 35V is supplied to the electrical load.To prevent excessive costs, H bridge is acceptable to set the operating temperature to 85°C.Accordingly, -20°C is an acceptable minimum operating temperature in order to avoid incurring excessive costs.
LB1940T-TLM-H Features
Available in TSSOP Package / Case
Operate supply voltage at -20°C
LB1940T-TLM-H Applications
There are a lot of ON Semiconductor LB1940T-TLM-H Full Bridge Drivers, Half-Bridge Drivers applications.
- Bipolar stepper motor
- Audio-visual equipment
- High-Current DC-DC Point-of-Load Converters
- Industrial Automation
- Voltage Regulators for CPUs
- Quad DC motor
- Industrial Fans
- Optical disc drives
- CD players
- Voltage Regulators for GPUs
