LC4064V-75TN44C
| Parameters | |
|---|---|
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 400MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4064 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 12mA |
| Number of I/O | 30 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Number of Logic Elements/Cells | 36 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 2 |
| Voltage Supply - Internal | 3V~3.6V |
| Number of Logic Elements/Blocks | 4 |
| Height | 1mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
LC4064V-75TN44C Overview
There are 64 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).It is embedded in the 44-TQFP package.As a result, it has 30 I/O ports programmed.The termination of a device is set to [0].Its terminal position is QUAD.Power is provided by a supply voltage of 3.3V volts.It is included in Programmable Logic Devices.Ideally, the chip should be packaged by Tray.To ensure its reliability, the operating temperature is set to [0].There should be a Surface Mounton the chip.In terms of FPGAs, it belongs to the ispMACH? 4000V series.In this chip, the 44pins are programmed.This device can also display [0].Its related parts can be found in the [0].High efficiency requires the supply voltage to be maintained at [0].Data storage is performed using [0].The electronic part is mounted by Surface Mount.The device is designed with pins [0].This device operates at a voltage of 3.6V when the maximum supply voltage is applied.A minimum supply voltage of 3V is required for it to operate.There are a total of 4 logic elements or blocks.In this case, 400MHzis the frequency that can be achieved.To detect the status of input signals, there are 2dedicated inputs.In order to form a fundamental building block, there are 36logic elements/cells.
LC4064V-75TN44C Features
44-TQFP package
30 I/Os
The operating temperature of 0°C~90°C TJ
44 pin count
44 pins
LC4064V-75TN44C Applications
There are a lot of Lattice Semiconductor Corporation LC4064V-75TN44C CPLDs applications.
- Address decoders
- Bootloaders for FPGAs
- I2C BUS INTERFACE
- LED Lighting systems
- D/T registers and latches
- Dedicated input registers
- I/O expansion
- PLC analog input modules
- Power up sequencing
- Multiple Clock Source Selection
