LC4064ZC-75MN132I
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 132-LFBGA, CSPBGA |
| Number of Pins | 132 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000Z |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 132 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn96.5Ag3.0Cu0.5) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4064 |
| Pin Count | 132 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Operating Supply Current | 80μA |
| Number of I/O | 64 |
| Nominal Supply Current | 80μA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Max Frequency | 250MHz |
| Number of Programmable I/O | 484 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 4 |
| Height Seated (Max) | 1.35mm |
| Length | 8mm |
| Width | 8mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LC4064ZC-75MN132I Overview
There are 64 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.A 132-LFBGA, CSPBGA package contains the item.This device has 64 I/O ports programmed into it.There are 132 terminations programmed into the device.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.It is powered by a voltage of 1.8V volts.There is a part in the family [0].It is recommended that the chip be packaged by Tray.It operates with the operating temperature of -40°C~105°C TJ to ensure its reliability.The chip should be mounted by Surface Mount.It belongs to the ispMACH? 4000Zseries of FPGAs.A chip with 132pins is programmed.If you use this device, you will also find [0].LC4064contains its related parts.It is recommended that the supply voltage be kept at 1.8Vto maximize efficiency.It is adopted to store data in [0].The electronic part is mounted by Surface Mount.There are 132 pins embedded in the device.This device operates at a voltage of 1.9V when the maximum supply voltage is applied.In order for it to operate, a supply voltage of 1.7Vis required.There are 4 logic elements or blocks present.A total of 484programmable I/Os are available.It is recommended that the maximum frequency be less than 250MHz.The input signals are detected by 10dedicated inputs.
LC4064ZC-75MN132I Features
132-LFBGA, CSPBGA package
64 I/Os
The operating temperature of -40°C~105°C TJ
132 pin count
132 pins
LC4064ZC-75MN132I Applications
There are a lot of Lattice Semiconductor Corporation LC4064ZC-75MN132I CPLDs applications.
- Dedicated input registers
- Address decoders
- INTERRUPT SYSTEM
- Code converters
- Battery operated portable devices
- Reset swapping
- ON-CHIP OSCILLATOR CIRCUIT
- Programmable power management
- Boolean function generators
- I/O PORTS (MCU MODULE)
