LC4128V-75T128E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 128-LQFP |
| Operating Temperature | -40°C~130°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Frequency | 178.57MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4128 |
| Pin Count | 128 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 12mA |
| Number of I/O | 92 |
| Nominal Supply Current | 12mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Number of Logic Elements/Cells | 36 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 3V~3.6V |
| Number of Logic Elements/Blocks | 8 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4128V-75T128E Overview
Currently, there are 128 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.The product is contained in a 128-LQFP package.It is programmed with 92 I/Os.Devices are programmed with terminations of [0].The terminal position of this electrical component is QUAD.There is 3.3V voltage supply for this device.The part belongs to Programmable Logic Devices family.It is recommended that the chip be packaged by Tray.Ensure its reliability by operating at [0].It is recommended that Surface Mountholds the chip in place.It belongs to the ispMACH? 4000Vseries of FPGAs.A chip with 128pins is programmed.It is also possible to find YESwhen using this device.The LC4128indicates that related parts can be found.If high efficiency is to be achieved, the supply voltage should be maintained at [0].It is recommended to store data in [0].This electronic part is mounted in the way of Surface Mount.It operates at a maximum supply voltage of 3.6V volts.It is powered by 3Vas its minimum supply voltage.There are 8 logic elements or blocks present.This frequency is 178.57MHz.To detect the status of input signals, there are 4dedicated inputs.As a fundamental building block, there are 36 logic elements/cells.
LC4128V-75T128E Features
128-LQFP package
92 I/Os
The operating temperature of -40°C~130°C TJ
128 pin count
LC4128V-75T128E Applications
There are a lot of Lattice Semiconductor Corporation LC4128V-75T128E CPLDs applications.
- Complex programmable logic devices
- PLC analog input modules
- Code converters
- Bootloaders for FPGAs
- STANDARD SERIAL INTERFACE UART
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- ROM patching
- Software-driven hardware configuration
- I/O PORTS (MCU MODULE)
- TIMERS/COUNTERS
