LC4256B-3TN100C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000B |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LC4256 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 12.5mA |
| Number of I/O | 64 |
| Nominal Supply Current | 12.5mA |
| Memory Type | EEPROM |
| Propagation Delay | 3 ns |
| Max Frequency | 322MHz |
| Number of Programmable I/O | 680 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 2.3V~2.7V |
| Delay Time tpd(1) Max | 3ns |
| Number of Logic Elements/Blocks | 16 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LC4256B-3TN100C Overview
There are 256 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).There is a 100-LQFP package containing it.It is equipped with 64I/O ports.Terminations of devices are set to [0].The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.A voltage of 2.5Vprovides power to the device.It is a part of family [0].It is packaged in the way of Tray.The operating temperature of the machine is 0°C~90°C TJ to ensure its reliability.Surface Mountshould be used for mounting the chip.This type of FPGA is a part of the ispMACH? 4000B series.It is equipped with 100 pin count.When using this device, YEScan also be found.The LC4256shows its related parts.A high level of efficiency can be achieved by maintaining the supply voltage at [0].In this case, EEPROMwill be used to store the data.A Surface Mountis mounted on this electronic component.There are 100 pins embedded in the device.This device operates at a voltage of 2.7V when the maximum supply voltage is applied.A minimum supply voltage of 2.3V is required for this device to operate.16logic blocks/elements are present.In total, there are 680programmable I/Os.It is recommended not to exceed 322MHzin terms of frequency.It has 10dedicated inputs for detecting input signals.
LC4256B-3TN100C Features
100-LQFP package
64 I/Os
The operating temperature of 0°C~90°C TJ
100 pin count
100 pins
LC4256B-3TN100C Applications
There are a lot of Lattice Semiconductor Corporation LC4256B-3TN100C CPLDs applications.
- Page register
- LED Lighting systems
- Software-driven hardware configuration
- Protection relays
- I/O expansion
- State machine control
- Programmable polarity
- Auxiliary Power Supply Isolated and Non-isolated
- Bootloaders for FPGAs
- Software-Driven Hardware Configuration
