LC4256V-10TN144I
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 144-LQFP |
| Number of Pins | 144 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4256 |
| Pin Count | 144 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 12.5mA |
| Number of I/O | 96 |
| Nominal Supply Current | 12.5mA |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Logic Elements/Cells | 16 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 3V~3.6V |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LC4256V-10TN144I Overview
There are 256 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.It is embedded in the 144-LQFP package.In this case, there are 96 I/Os programmed.There is a 144terminations set on devices.There is a QUADterminal position on the electrical part in question.There is 3.3V voltage supply for this device.It is a part of family [0].Trayis the packaging method.The temperature at which it operates is set to -40°C~105°C TJin order to ensure its reliability.Mount the chip by Surface Mount.The FPGA belongs to the ispMACH? 4000V series.A chip with 144pins is programmed.The device can also be used to find [0].The LC4256indicates that related parts can be found.The supply voltage should be maintained at 3.3V for high efficiency.In this case, EEPROMwill be used to store the data.In this case, Surface Mountis used to mount the electronic component.The device is designed with pins [0].There is a maximum supply voltage of 3.6Vwhen the device is operating.The minimal supply voltage is 3V.It is possible to achieve a frequency of 125MHz.Input signals are detected by 4dedicated inputs.As a fundamental building block, there are 16 logic elements/cells.
LC4256V-10TN144I Features
144-LQFP package
96 I/Os
The operating temperature of -40°C~105°C TJ
144 pin count
144 pins
LC4256V-10TN144I Applications
There are a lot of Lattice Semiconductor Corporation LC4256V-10TN144I CPLDs applications.
- Pattern recognition
- Timing control
- D/T registers and latches
- USB Bus
- Parity generators
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Protection relays
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Power up sequencing
