LC4384B-5T176I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP |
| Number of Pins | 176 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000B |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4384 |
| Pin Count | 176 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 13.5mA |
| Number of I/O | 128 |
| Nominal Supply Current | 13.5mA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Number of Logic Elements/Cells | 24 |
| Max Frequency | 322MHz |
| Number of Programmable I/O | 48 |
| Output Function | MACROCELL |
| Number of Macro Cells | 384 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 2.3V~2.7V |
| Delay Time tpd(1) Max | 5ns |
| Height Seated (Max) | 1.6mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4384B-5T176I Overview
A mobile phone network consists of 384macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).It is part of the 176-LQFP package.In this case, there are 128 I/Os programmed.176terminations are programmed into the device.This electrical part is wired with a terminal position of QUAD.The device is powered by a voltage of 2.5V volts.There is a part in the family [0].It is recommended that the chip be packaged by Tray.Due to its reliability, it is operated at a temperature of [0].The chip should be mounted by Surface Mount.In terms of FPGAs, it belongs to the ispMACH? 4000B series.With 176pins programmed, the chip is ready to use.This device can also display [0].The LC4384can be used to identify its related parts.High efficiency requires the supply voltage to be maintained at [0].Data storage is performed using [0].In this case, Surface Mountis used to mount the electronic component.The 176pins are designed into the board.A maximum voltage of 2.7Vis required for operation.It is powered by 2.3Vas its minimum supply voltage.There are 48 Programmable I/Os.It is recommended that the maximal frequency be lower than 322MHz.Input signals are detected using 4dedicated inputs.A fundamental building block consists of 24logic elements/cells.
LC4384B-5T176I Features
176-LQFP package
128 I/Os
The operating temperature of -40°C~105°C TJ
176 pin count
176 pins
LC4384B-5T176I Applications
There are a lot of Lattice Semiconductor Corporation LC4384B-5T176I CPLDs applications.
- DDC INTERFACE
- Bootloaders for FPGAs
- ON-CHIP OSCILLATOR CIRCUIT
- LED Lighting systems
- Power Meter SMPS
- Programmable power management
- I2C BUS INTERFACE
- Storage Cards and Storage Racks
- INTERRUPT SYSTEM
- PULSE WIDTH MODULATION (PWM)
