LC4512B-5T176I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP |
| Number of Pins | 176 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000B |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4512 |
| Pin Count | 176 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 14mA |
| Number of I/O | 128 |
| Nominal Supply Current | 14mA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Number of Logic Elements/Cells | 32 |
| Max Frequency | 322MHz |
| Number of Programmable I/O | 44 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 2.3V~2.7V |
| Delay Time tpd(1) Max | 5ns |
| Height Seated (Max) | 1.6mm |
| Length | 24mm |
| Width | 24mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4512B-5T176I Overview
In the mobile phone network, there are 512macro cells, which are cells with high-power antennas and towers.It is part of the 176-LQFP package.In this case, there are 128 I/Os programmed.176terminations are programmed into the device.This electrical part has a terminal position of QUADand is connected to the ground.It is powered from a supply voltage of 2.5V.This part is included in Programmable Logic Devices.Trayshould be used to package the chip.The device operates at a temperature of -40°C~105°C TJin order to ensure its reliability.Mount the chip by Surface Mount.This type of FPGA is a part of the ispMACH? 4000B series.There are 176 pins on the chip.When using this device, YEScan also be found.The LC4512can be used to identify its related parts.If high efficiency is desired, the supply voltage should be kept at [0].For data storage, EEPROMis adopted.In this case, it is mounted by Surface Mount.It is designed with 176 pins.A maximum voltage of 2.7Vis required for operation.Initially, it requires a voltage of 2.3Vas the minimum supply voltage.In total, there are 44programmable I/Os.It is recommended that the maximum frequency be less than 322MHz.The input signals are detected by 4dedicated inputs.A fundamental building block of logic consists of 32logic elements/cells.
LC4512B-5T176I Features
176-LQFP package
128 I/Os
The operating temperature of -40°C~105°C TJ
176 pin count
176 pins
LC4512B-5T176I Applications
There are a lot of Lattice Semiconductor Corporation LC4512B-5T176I CPLDs applications.
- Boolean function generators
- I/O PORTS (MCU MODULE)
- ROM patching
- Programmable power management
- DDC INTERFACE
- Software Configuration of Add-In Boards
- Discrete logic functions
- POWER-SAVING MODES
- Multiple DIP Switch Replacement
- Power Meter SMPS
