LC4512B-75T176C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP |
| Number of Pins | 176 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000B |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4512 |
| Pin Count | 176 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 14mA |
| Number of I/O | 128 |
| Nominal Supply Current | 14mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Max Frequency | 322MHz |
| Number of Programmable I/O | 44 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 2.3V~2.7V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 32 |
| Height Seated (Max) | 1.6mm |
| Length | 24mm |
| Width | 24mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4512B-75T176C Overview
There are 512 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).A 176-LQFP package contains the item.As a result, it has 128 I/O ports programmed.It is programmed that device terminations will be 176 .This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.The power supply voltage is 2.5V.The part belongs to Programmable Logic Devices family.Trayshould be used to package the chip.To ensure its reliability, the operating temperature is set to [0].The chip should be mounted by Surface Mount.It is a type of FPGA belonging to the ispMACH? 4000B series.It is programmed with 176 pins.The device can also be used to find [0].Its related parts can be found in the [0].The supply voltage should be maintained at 2.5V for high efficiency.In order to store data, EEPROMis used.Surface Mountmounts this electronic component.The 176pins are designed into the board.It operates at a maximum supply voltage of 2.7V volts.It operates with the minimal supply voltage of 2.3V.This logic block consists of 32logic elements.A total of 44 Programmable I/Os are available.322MHzis the maximum frequency.The status of input signals is detected by 4dedicated inputs.
LC4512B-75T176C Features
176-LQFP package
128 I/Os
The operating temperature of 0°C~90°C TJ
176 pin count
176 pins
LC4512B-75T176C Applications
There are a lot of Lattice Semiconductor Corporation LC4512B-75T176C CPLDs applications.
- Portable digital devices
- Address decoders
- Software-driven hardware configuration
- High speed graphics processing
- Power up sequencing
- TIMERS/COUNTERS
- Voltage level translation
- Interface bridging
- Programmable polarity
- Page register
