LCMXO2-256HC-6TG100C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | 0°C~85°C TJ |
| Packaging | Tray |
| Published | 2013 |
| Series | MachXO2 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Field Programmable Gate Arrays |
| Technology | CMOS |
| Voltage - Supply | 2.375V~3.465V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LCMXO2-256 |
| Number of Outputs | 56 |
| Operating Supply Voltage | 3.3V |
| Memory Size | 256B |
| Operating Supply Current | 18μA |
| Number of I/O | 55 |
| RAM Size | 0B |
| Memory Type | FLASH |
| Propagation Delay | 6.8 ns |
| Turn On Delay Time | 6.8 ns |
| Programmable Logic Type | FIELD PROGRAMMABLE GATE ARRAY |
| Number of Logic Elements/Cells | 256 |
| Max Frequency | 388MHz |
| Number of LABs/CLBs | 32 |
| Number of Macro Cells | 128 |
| Number of Logic Cells | 256 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LCMXO2-256HC-6TG100C Overview
In the package 100-LQFP, this product is provided. FIELD PROGRAMMABLE GATE ARRAY is the component of this type of FPGA. A total of 55 I/Os allow data to be transferred in a more coherent manner. There are 256 logic elements/cells to form a fundamental building block. The supply voltage is 2.5V volts. This FPGA part belongs to the family of Field Programmable Gate Arrays. FPGA modules can be attached to development boards using a Surface Mount-connector. There is a 2.375V~3.465V-volt supply voltage required for the device to operate. The MachXO2 Series is one of the types of FPGAs that belong to this type. Fpga chips is necessary to keep the operating temperature wFpga chipshin 0°C~85°C TJ when the device is operating. During the installation of this device, 56 outputs were incorporated. Using the Tray layout, this FPGA model can be contained in a very small amount of space. In total, the terminations of this piece are 100. In order to find related parts, use the part number LCMXO2-256 as a base. The FPGA module's RAM si0Be reaches 0B in order to ensure that the program operates in a normal manner. In order to make it work, 100 pins have been designed. A total of 32 LABs/CLBs are included in this FPGA. Fpga electronics is possible for this FPGA to perform as per fpga electronics s specifications as long as fpga electronics is mounted in Surface Mount direction. Design engineers can fully take advantage of its flexibility when operating at 3.3V supply voltage. For storing programs and data, this FPGA module embeds memory 256B. As far as the speed of this FPGA is concerned, it can get up to 388MHz. For the building block, it encompasses 256 logic cells that make up the logic circuit. The supply current used for its operation is 18μA. Fpga circuit is important to note that the main building blocks of a CPLD in this device are 128 macrocells. A FLASH memory provides data storage and avoids resource conflicts.
LCMXO2-256HC-6TG100C Features
55 I/Os
100 LABs/CLBs
LCMXO2-256HC-6TG100C Applications
There are a lot of Lattice Semiconductor Corporation LCMXO2-256HC-6TG100C FPGAs applications.
- Consumer Electronics
- Electronic Warfare
- Wireless Communications
- Device controllers
- ADAS
- Embedded Vision
- Automotive advanced driver assistance systems (ADAS)
- Software-defined radio
- Medical Applications
- Aerospace and Defense
