LFE2-20E-6FN672I
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 672-BBGA |
| Number of Pins | 672 |
| Operating Temperature | -40°C~100°C TJ |
| Packaging | Tray |
| Published | 2008 |
| Series | ECP2 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 672 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn96.5Ag3.0Cu0.5) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Field Programmable Gate Arrays |
| Voltage - Supply | 1.14V~1.26V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LFE2-20 |
| Pin Count | 672 |
| Number of Outputs | 402 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.2V |
| Memory Size | 39.8kB |
| Number of I/O | 402 |
| RAM Size | 34.5kB |
| Clock Frequency | 357MHz |
| Programmable Logic Type | FIELD PROGRAMMABLE GATE ARRAY |
| Number of Logic Elements/Cells | 21000 |
| Total RAM Bits | 282624 |
| Number of LABs/CLBs | 2625 |
| Combinatorial Delay of a CLB-Max | 0.331 ns |
| Number of Logic Cells | 20000 |
| Height Seated (Max) | 2.6mm |
| Length | 27mm |
| Width | 27mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LFE2-20E-6FN672I Overview
As part of the 672-BBGA package, it is included. This kind of FPGA is composed of FIELD PROGRAMMABLE GATE ARRAY. There are 402 I/Os for better data transfer. In order to construct a fundamental building block, 21000 logic elements/cells are required. It is powered from a supply voltage of 1.2V. Field Programmable Gate Arrays family FPGA part. The Surface Mount-slot connector on the FPGA module can be connected to the development board. There is a 1.14V~1.26V-volt supply voltage required for the device to operate. As part of the ECP2 series of FPGAs, it is a type of FPGA. Fpga chips is necessary to keep the operating temperature wFpga chipshin -40°C~100°C TJ when the device is operating. A total of 402 outputs are incorporated into this device. Unlike other FPGA models, this one is contained in Tray for the sake of space saving. 672 terminations are present in total. This device is equipped with 282624 RAM bits in terms of its RAM si282624e. LFE2-20 is the base part number that can be used to identify related parts. A significant amount of RAM is allocated to this FPGA module to ensure that the program can operate normally. There are 672 pins on this device. An array of 2625 LABs/CLBs is built into the FPGA. In my opinion, this FPGA could produce fantastic results if mounted in Surface Mount, provided that its specifications are followed. In the case of 1.2V supply voltage, designers can take full advantage of its flexibility. Fpga semiconductor is equipped wfpga semiconductorh 672 pin count. Usually, fpga semiconductor uses a 357MHz crystal. For storing programs and data, this FPGA module embeds memory 39.8kB. It incorporates 20000 logic cells used for the building block.
LFE2-20E-6FN672I Features
402 I/Os
Up to 282624 RAM bits
672 LABs/CLBs
LFE2-20E-6FN672I Applications
There are a lot of Lattice Semiconductor Corporation LFE2-20E-6FN672I FPGAs applications.
- Software-defined radios
- Software-defined radio
- Image processing
- Distributed Monetary Systems
- Camera time adjustments
- Cryptography
- Development Boards and Shields for Microcontrollers
- Consumer Electronics
- Medical ultrasounds
- Medical Applications
