LFE2-20SE-7FN256C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 256-BGA |
| Number of Pins | 256 |
| Operating Temperature | 0°C~85°C TJ |
| Packaging | Tray |
| Published | 2012 |
| Series | ECP2 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Field Programmable Gate Arrays |
| Voltage - Supply | 1.14V~1.26V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LFE2-20 |
| Pin Count | 256 |
| Number of Outputs | 193 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.2V |
| Memory Size | 39.8kB |
| Number of I/O | 193 |
| RAM Size | 34.5kB |
| Programmable Logic Type | FIELD PROGRAMMABLE GATE ARRAY |
| Number of Logic Elements/Cells | 21000 |
| Total RAM Bits | 282624 |
| Max Frequency | 420MHz |
| Number of LABs/CLBs | 2625 |
| Combinatorial Delay of a CLB-Max | 0.304 ns |
| Number of Logic Cells | 20000 |
| Height Seated (Max) | 2.1mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LFE2-20SE-7FN256C Overview
In the 256-BGA package, you will find fpga chips. This kind of FPGA is composed of FIELD PROGRAMMABLE GATE ARRAY. The device has 193 I/O ports for more coherent data transfer. The basic building blocks of logic contain 21000 logic elements/cells. An electrical supply voltage of 1.2V powers it. In this case, the FPGA part belongs to the Field Programmable Gate Arrays family. The Surface Mount-slot connector on the FPGA module can be connected to the development board. This device is powered by a 1.14V~1.26V battery. As part of the ECP2 series of FPGAs, it is a type of FPGA. While operating, the operating temperature should be kept within a range of 0°C~85°C TJ. A device such as this one has 193 outputs built into it. Using the Tray layout, this FPGA model can be contained in a very small amount of space. In total, the terminations of this piece are 256. The RAM bits that are offered by this fpga chips are 282624. Its base part number LFE2-20 can be used to find parts that are related to it. A significant amount of RAM is allocated to this FPGA module to ensure that the program can operate normally. This cable has 256 pins and is designed to connect to a computer. 2625 LABs/CLBs are configured on this FPGA. Providing the FPGA is mounted in Surface Mount as per the specifications of the IC, then it should work perfectly according to its specifications. A 1.2V-volt supply allows designers to fully utilize its flexibility. The device has a total of 256 pins on fpga semiconductor. Data and programs can be stored in this FPGA module's 39.8kB memory. This FPGA can get as fast as 420MHz. Fpga semiconductor incorporates 20000 logic cells used for the building block.
LFE2-20SE-7FN256C Features
193 I/Os
Up to 282624 RAM bits
256 LABs/CLBs
LFE2-20SE-7FN256C Applications
There are a lot of Lattice Semiconductor Corporation LFE2-20SE-7FN256C FPGAs applications.
- Telecommunication
- Industrial,Medical and Scientific Instruments
- Server Applications
- Industrial Ethernet
- Industrial IoT
- Aerospace and Defense
- Electronic Warfare
- Medical Applications
- Wired Communications
- Data Mining
