banner_page

LFE2M35SE-5FN256I

1.2V V 2.1mm mm 271.5kB B FPGAs ECP2M Series 256-BGA 1mm mm 256


  • Manufacturer: Lattice Semiconductor Corporation
  • Nocochips NO: 477-LFE2M35SE-5FN256I
  • Package: 256-BGA
  • Datasheet: PDF
  • Stock: 674
  • Description: 1.2V V 2.1mm mm 271.5kB B FPGAs ECP2M Series 256-BGA 1mm mm 256 (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 256-BGA
Number of Pins 256
Operating Temperature -40°C~100°C TJ
Packaging Tray
Published 2008
Series ECP2M
JESD-609 Code e1
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 256
ECCN Code EAR99
Terminal Finish Tin/Silver/Copper (Sn/Ag/Cu)
HTS Code 8542.39.00.01
Subcategory Field Programmable Gate Arrays
Voltage - Supply 1.14V~1.26V
Terminal Position BOTTOM
Terminal Form BALL
Peak Reflow Temperature (Cel) 250
Supply Voltage 1.2V
Terminal Pitch 1mm
Reach Compliance Code not_compliant
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number LFE2M35
Pin Count 256
Number of Outputs 140
Qualification Status Not Qualified
Operating Supply Voltage 1.2V
Memory Size 271.5kB
Number of I/O 140
RAM Size 262.6kB
Programmable Logic Type FIELD PROGRAMMABLE GATE ARRAY
Number of Logic Elements/Cells 34000
Total RAM Bits 2151424
Max Frequency 320MHz
Number of LABs/CLBs 4250
Combinatorial Delay of a CLB-Max 0.358 ns
Height Seated (Max) 2.1mm
Length 17mm
Width 17mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

LFE2M35SE-5FN256I Overview


This package is included in the 256-BGA package and is available for purchase. A FIELD PROGRAMMABLE GATE ARRAY-based FPGA is one of these types. The device has 140 I/O ports for more coherent data transfer. A fundamental building block consists of 34000 logic elements/cells. It is powered from a supply voltage of 1.2V. In this case, the FPGA part belongs to the Field Programmable Gate Arrays family. The Surface Mount-slot on the development board allows you to attach the FPGA module. In order to operate it, it requires a voltage supply of 1.14V~1.26V . The ECP2M Series is one of the types of FPGAs that belong to this type. As far as the operating temperature is concerned, it should be kept within -40°C~100°C TJ when operating. During the installation of this device, 140 outputs were incorporated. A model of this FPGA is contained in Tray for the purpose of saving space. In total, there are a total of 256 terminations on fpga chips. Fpga chips is important to note that this device has a RAM capacFpga chipsy of 2151424 bFpga chipss. LFE2M35 is the base part number that can be used to identify related parts. During the configuration of this FPGA module, the RAM si262.6kBe reaches 262.6kB to ensure that the program runs normally. There are 256 pins on this device. A total of 4250 LABs/CLBs are included in this FPGA. As long as this FPGA is mounted in Surface Mount, it should be able to function as it should in terms of its specifications, as well as its capabilities. With a 1.2V supply voltage, designers can fully utilize the flexibility of the device. In addition to this, it has 256 pins. Data and programs can be stored in this FPGA module's 271.5kB memory. A FPGA of this type can achieve a speed as high as 320MHz.

LFE2M35SE-5FN256I Features


140 I/Os
Up to 2151424 RAM bits
256 LABs/CLBs

LFE2M35SE-5FN256I Applications


There are a lot of Lattice Semiconductor Corporation LFE2M35SE-5FN256I FPGAs applications.

  • Bioinformatics
  • Embedded Vision
  • Consumer Electronics
  • Telecommunication
  • Camera time adjustments
  • ADAS
  • Distributed Monetary Systems
  • Software-defined radios
  • OpenCL
  • Integrating multiple SPLDs

Write a review

Note: HTML is not translated!
    Bad           Good