LFE2M50SE-7FN672C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 672-BBGA |
| Number of Pins | 672 |
| Operating Temperature | 0°C~85°C TJ |
| Packaging | Tray |
| Published | 2012 |
| Series | ECP2M |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 672 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn96.5Ag3.0Cu0.5) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Field Programmable Gate Arrays |
| Voltage - Supply | 1.14V~1.26V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LFE2M50 |
| Pin Count | 672 |
| Number of Outputs | 372 |
| Operating Supply Voltage | 1.2V |
| Memory Size | 531kB |
| Number of I/O | 372 |
| RAM Size | 518.4kB |
| Clock Frequency | 420MHz |
| Programmable Logic Type | FIELD PROGRAMMABLE GATE ARRAY |
| Number of Logic Elements/Cells | 48000 |
| Total RAM Bits | 4246528 |
| Number of LABs/CLBs | 6000 |
| Combinatorial Delay of a CLB-Max | 0.304 ns |
| Number of Logic Cells | 50000 |
| Height Seated (Max) | 2.6mm |
| Length | 27mm |
| Width | 27mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LFE2M50SE-7FN672C Overview
A 672-BBGA package is provided with this component. This kind of FPGA is composed of FIELD PROGRAMMABLE GATE ARRAY. There are 372 I/Os for better data transfer. A fundamental building block is made up of 48000 logic elements/cells. It is powered from a supply voltage of 1.2V. The Field Programmable Gate Arrays family of FPGA parts includes this part. The Surface Mount-slot connector on the FPGA module can be connected to the development board. There is a 1.14V~1.26V-volt supply voltage required for the device to operate. This is a type of FPGA that is part of the ECP2M series of FPGAs. The operating temperature should be kept at 0°C~85°C TJ when operating. This device is equipped with 372 separate outputs, which makes it a very versatile device. As a space-saving measure, this FPGA model is contained within Tray. There are a total of 672 terminations. A device like this one offers 4246528 RAM bits, which is a considerable amount of memory. LFE2M50 is the base part number that can be used to identify related parts. This FPGA module has a RAM si518.4kBe of 518.4kB that is sufficient to make sure that the program is able to run normally. In this case, there are 672 pins on the board. An array of 6000 LABs/CLBs is built into the FPGA. In order for this FPGA to work properly in accordance with its specifications, it is necessary that it is mounted in Surface Mount. The 1.2V supply voltage provides designers with full flexibility in their designs. With a total of 672 pins, it is equipped with a high level of security. Usually, fpga semiconductor uses a 420MHz crystal. A memory of 531kB is embedded in this FPGA module for storing data and programs. For the building block of this system, 50000 logic cells are included.
LFE2M50SE-7FN672C Features
372 I/Os
Up to 4246528 RAM bits
672 LABs/CLBs
LFE2M50SE-7FN672C Applications
There are a lot of Lattice Semiconductor Corporation LFE2M50SE-7FN672C FPGAs applications.
- Enterprise networking
- Device controllers
- Medical ultrasounds
- Medical imaging
- Medical Electronics
- Radar and Sensors
- Scientific Instruments
- Automotive driver's assistance
- Broadcast
- Aerospace and Defense
