LM1875T/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Through Hole |
| Package / Case | TO-220-5 Formed Leads |
| Surface Mount | NO |
| Number of Pins | 5 |
| Weight | 9.071847g |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | Short-Circuit and Thermal Protection |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Type | Class AB |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Audio/Video Amplifiers |
| Technology | BIPOLAR |
| Voltage - Supply | 16V~60V ±8V~30V |
| Terminal Position | ZIG-ZAG |
| Number of Functions | 1 |
| Base Part Number | LM1875 |
| Output Type | 1-Channel (Mono) |
| Operating Supply Voltage | 28V |
| Number of Channels | 2 |
| Nominal Supply Current | 100mA |
| Max Supply Current | 100mA |
| Quiescent Current | 70mA |
| Output Power | 25W |
| Slew Rate | 8 V/μs |
| Supply Type | Dual, Single |
| Input Offset Voltage (Vos) | 15mV |
| Bandwidth | 70 kHz |
| Gain Bandwidth Product | 5.5MHz |
| Voltage Gain | 90dB |
| Power Supply Rejection Ratio (PSRR) | 95dB |
| Gain | 90 dB |
| Max Dual Supply Voltage | 30V |
| Max Output Power | 30W |
| Min Dual Supply Voltage | 8V |
| Dual Supply Voltage | 18V |
| Input Bias Current | 2μA |
| Max Output Power x Channels @ Load | 25W x 1 @ 8 Ω |
| Harmonic Distortion | 1% |
| Number of Amplifiers | 1 |
| Load Impedance | 8Ohm |
| Height | 4.7mm |
| Length | 14.986mm |
| Width | 10.16mm |
| Thickness | 4.572mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM1875T/NOPB Overview
I have embedded this device in TO-220-5 Formed Leads .Amp parts is recommended that the chip be packaged in the case Tube .In the configuration, 1-Channel (Mono) is used as the output.In terms of electrical devices, it belongs to the type Class AB .In a computer or other communication device, there are 5 pins, which are pronged contacts.A part of this electronic device is mounted in the way of Through Hole .In this electrical device, the supply voltage is 16V~60V ±8V~30V .The number of channels is growing strong/weak: 2 .During operation, Short-Circuit and Thermal Protection can be ensured.The operating temperature should not exceed 0°C~70°C TA .The part belongs to Audio/Video Amplifiers .Amp parts is part of the LM1875 family.This electronic part has a maximum output power of 30W kWh per hour.The supply type of this electronic part is Dual, Single .The device consumes 70mA quiescent current and is unaffected by external influences.As of this writing, there are 1 amplifiers, which are electronic devices that increase a signal's voltage, current, or power.
LM1875T/NOPB Features
TO-220-5 Formed Leads package
LM1875 family
30W kWh per hour
LM1875T/NOPB Applications
There are a lot of Texas Instruments LM1875T/NOPB audio amplifiers applications.
- Inverse/same-phase proportional circuit
- Signal transformation
- Communication
- Power generator
- Medical instruments
- Test and measurement instruments
- Medical imaging
- Signal amplification
- Displayers for aircraft and air transportation control systems
- Fission chambers
