LM1876TF/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Through Hole |
| Package / Case | TO-220-15 Isolated Tab, Formed Leads |
| Surface Mount | NO |
| Number of Pins | 15 |
| Weight | 13.607771g |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tube |
| Series | Overture™ |
| JESD-609 Code | e3 |
| Feature | Depop, Mute, Short-Circuit and Thermal Protection |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 15 |
| ECCN Code | EAR99 |
| Type | Class AB |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 62.5W |
| Technology | BIPOLAR |
| Voltage - Supply | 20V~64V ±10V~32V |
| Terminal Position | ZIG-ZAG |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LM1876 |
| Pin Count | 3 |
| Output Type | 2-Channel (Stereo) |
| Operating Supply Voltage | 28V |
| Number of Channels | 2 |
| Nominal Supply Current | 50mA |
| Power Dissipation | 62.5W |
| Quiescent Current | 50mA |
| Output Power | 20W |
| Slew Rate | 18 V/μs |
| Common Mode Rejection Ratio | 80 dB |
| Supply Type | Dual, Single |
| Input Offset Voltage (Vos) | 15mV |
| Bandwidth | 7.5MHz |
| Gain Bandwidth Product | 7.5MHz |
| Voltage Gain | 110dB |
| Power Supply Rejection Ratio (PSRR) | 115dB |
| Gain | 85 dB |
| Max Dual Supply Voltage | 32V |
| Max Output Power | 22W |
| Min Dual Supply Voltage | 10V |
| Dual Supply Voltage | 28V |
| Input Bias Current | 500nA |
| Max Output Power x Channels @ Load | 22W x 2 @ 4 Ω |
| Harmonic Distortion | 0.009% |
| Load Impedance | 4Ohm |
| Height | 4.62mm |
| Length | 20.015mm |
| Width | 19.583mm |
| Thickness | 4.496mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
LM1876TF/NOPB Overview
In the TO-220-15 Isolated Tab, Formed Leads package, it is embedded.Amp parts is packaged in the way of Tube .The 15 termination refers to terminating transmission lines with devices that match their characteristic impedance.2-Channel (Stereo) is used for its output.This electrical device is classified as type Class AB .There are 15 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. This electronic part is mounted in the way of Through Hole .There is 20V~64V ±10V~32V voltage supply to this electrical device.Currently, the device has only 2 channels.Operation can be ensured by Depop, Mute, Short-Circuit and Thermal Protection .Amp parts is recommended that the operating temperature not exceed -20°C~85°C TA .There are 3 pins present on this device.This chip belongs to Audio/Video Amplifiers .The LM1876 family includes it.An electronic part such as this has a maximum output power of 22W kWh per hour.Amp parts is an electronic part wAmp partsh a supply type of Dual, Single .The series Overture? contains it.50mA external influences affect the amount of quiescent current consumed by this device.
LM1876TF/NOPB Features
TO-220-15 Isolated Tab, Formed Leads package
3 pin count
LM1876 family
22W kWh per hour
Overture? series
LM1876TF/NOPB Applications
There are a lot of Texas Instruments LM1876TF/NOPB audio amplifiers applications.
- single/dual op amp sum and difference circuits
- High speed sample
- ECG equipment
- High-frequency data acquisition systems
- Logarithmic and exponential operation circuits
- Signal amplification
- Power control
- Power transmission
- Multiplication and division circuits
- Vehicle electronics
