LM211QDREP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | LM211 |
| Pin Count | 8 |
| Output Type | DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL |
| Operating Supply Voltage | 9V |
| Number of Elements | 1 |
| Nominal Supply Current | 6mA |
| Output Current | 50mA |
| Max Supply Current | 6mA |
| Quiescent Current | 6mA |
| Response Time | 165 ns |
| Voltage - Supply, Single/Dual (±) | 3.5V~30V ±1.75V~15V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 3mV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 106.02dB |
| Max Input Current | 100nA |
| Dual Supply Voltage | 9V |
| Input Bias Current | 100nA |
| Voltage - Input Offset (Max) | 3mV @ ±15V |
| Current - Input Bias (Max) | 0.1μA @ ±15V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM211QDREP Overview
Electronic comparator is packaged in 8-SOIC (0.154, 3.90mm Width) for convenient transportation.The comparator has a type DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL output.The part is shipped by Tape & Reel (TR) .8 terminals are found on the comparator.The component belongs to the Comparator family of electrical components.In the presence of a 15V voltage, the comparator is capable of accomplishing a variety of demanding tasks.It's a typical General Purpose comparator.Currently, it consists of only 1 elements.As a result, it contains 8 pins.Surface Mount universial mout for easy adapting.Electronic comparator is recommended that you set the operating temperature to -40°C~125°C in order to prevent malfunctions.There are 8 pins on the comparator.You can find more pin-to-pin solutions by searching LM211 .A quiescent current of 6mA is displayed by this comparator.A Surface Mount is provided for mounting on PCBs or other boards.Normally, the nominal supply current should be 6mA .If the current supply exceeds 6mA , the comparator might be damaged.You can input a maximum current of 100nA into this device.From the voltage formula, the voltage gain of the part is 106.02dB .The operating supply voltage for normal operation should be 9V .The device is packed in TR and is intended for general use (as an element in the ADC circuit).
LM211QDREP Features
DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 6mA
Voltage Gain: 106.02dB
LM211QDREP Applications
There are a lot of Texas Instruments LM211QDREP linear comparators applications.
- Building automation
- Battery management and protection
- Point of load regulators
- General-Purpose Portable Devices
- Mobile Phones and Tablets
- Power management
- High-Speed Sampling Circuits
- Security Detection Systems
- Wireless Base Stations
- General-Purpose, Low-Voltage Applications
