LM239AQDREP
| Parameters | |
|---|---|
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | LM239 |
| Pin Count | 14 |
| Output Type | CMOS, MOS, Open-Collector, TTL |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 2mA |
| Output Current | 20mA |
| Max Supply Current | 2mA |
| Quiescent Current | 2mA |
| Response Time | 300 ns |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 2.5mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.05μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 2.5mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
LM239AQDREP Overview
A convenient transport package is provided in 14-SOIC (0.154, 3.90mm Width) .This comparator is of the CMOS, MOS, Open-Collector, TTL output type.The chip is packaged with Tape & Reel (TR) .The comparator has a total of 14 terminals.The chip belongs to Comparator .A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.It's a typical Differential comparator.This element consists of 4 elements in total.The device includes 14 pins.A Surface Mount mounting type is recommended.Electronic comparator is recommended that the operating temperature be set to -40°C~125°C in order to prevent malfunctions.14 pins are available on the comparator.You can find more pin-to-pin solutions for your special requirements by searching LM239 .A quiescent current of 2mA is displayed by this comparator.This component has a Surface Mount mount for mounting to PCBs or other boards.Normal operation of the device requires a nominal supply current of 2mA .If the current supply exceeds 2mA , the comparator could malfunction.This device requires 5V power supplies to operate.There is a maximum current that can be input into the device of 250nA .Comparator electronics follows that the voltage gain of the part is 106.02dB .This device is usually used in ADC circuits (packaged in TR ).
LM239AQDREP Features
CMOS, MOS, Open-Collector, TTL output capability
Differential IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 2mA
Voltage Gain: 106.02dB
LM239AQDREP Applications
There are a lot of Texas Instruments LM239AQDREP linear comparators applications.
- General Purpose Low Voltage Applications
- Hand-Held Electronics
- Security Detection Systems
- Laptop Computers
- General-Purpose, Low-Voltage Applications
- Point of load regulators
- DC/DC and AC/DC power supplies
- Consumer Medical Electronics
- Portable and Battery-Powered Systems
- RC Timers
