LM2724AMX/NOPB
| Parameters | |
|---|---|
| Max Supply Current | 195μA |
| Input Type | Non-Inverting |
| Rise Time | 17ns |
| Fall Time (Typ) | 14 ns |
| Rise / Fall Time (Typ) | 17ns 12ns |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3.2A |
| High Side Voltage - Max (Bootstrap) | 28V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 720mW |
| Voltage - Supply | 4.3V~6.8V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | LM2724 |
| Pin Count | 8 |
| Max Output Current | 3.2A |
| Power Supplies | 5V |
| Nominal Supply Current | 195μA |
| Power Dissipation | 720mW |
| Output Current | 3.2A |
LM2724AMX/NOPB Overview
A higher level of flexibility is provided by its 8-SOIC (0.154, 3.90mm Width) package.Tape & Reel (TR) represents the package.There are 2 drivers installed for this device.Gate drivers is mounted in the way of Surface Mount.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 4.3V~6.8V supply voltage.Gate drivers is designed wGate driversh a gate type of N-Channel MOSFET.Temperature range -40°C~125°C TJ is allowed for this device.Non-Inverting is the input type used in this program.Its configuration starts with 8 terminations.Numerous related parts can be found under its base part number LM2724.You mount it with Surface Mount.There are 8 pins available in the device.The device is specifically designed to function with a supply voltage of 5V V.An output current as high as 3.2A can be achieved at maximum power.Within this subcategory of MOSFET Drivers, there are several useful electronic components.On the board, there are 8 component pins.Mosfet driver is possible to set the high-side voltage - Max (Bootstrap) to 28V.The device is capable of delivering a current of 3.2A.Its maximum power dissipation of 720mW shows its power loss capacity without overheating.If you want a stable supply current, you should keep it at 195μA.Due to its power supply of 5V, it provides an effective solution to power supply problems for a wide range of applications.
LM2724AMX/NOPB Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 28V
Maximum power dissipation of 720mW
LM2724AMX/NOPB Applications
There are a lot of Texas Instruments LM2724AMX/NOPB gate drivers applications.
- Power factor correction (PFC) circuits
- Isolated Supplies for controller area network (CAN),
- Commercial and agricultural vehicles (CAV)
- Video amplifiers
- RGB applications
- High current laser/LED systems
- serial peripheral interface (SPI), I2C
- Motor controllers
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Dual-Battery Systems
