LM2753SD/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Camera Flash |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM2753 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Power Supplies | 3.6V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Output Current | 250mA |
| Max Supply Current | 80μA |
| Quiescent Current | 60μA |
| Voltage - Output | 4.75V~5.25V |
| Topology | Switched Capacitor (Charge Pump) |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 400mA Flash |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 1 |
| Switching Frequency | 725kHz |
| Multiplexed Display Capability | NO |
| Touchscreen | Capacitive |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM2753SD/NOPB Overview
There is also a 10-WFDFN Exposed Pad package that is used to save space on the board. It has 1 outputs for LED drivers.Surface Mount is used for mounting the led light driver.It emerges as a DC DC Regulator, which is efficient and reliable.The LED driver has the capability of operating at a temperature of -40°C~85°C TA.Camera Flash has many advantages.10 terminations are designed for its operation.In this LED driver, the base is configured as 10.The number of segments is estimated to be 1.There is a mounting of it by Surface Mount.The LED driver is available under the part number LM2753.As a maximum value, 5.5V is acceptable.This device has an output voltage of 4.75V~5.25V volts.This device contains 10 pins.Moreover, it can be classified as Display Drivers due to its characteristics.When the input voltage is set to 3V, it operates.It works with the minimal supply voltage of 3V to meet highest efficiency standards.It is possible to supply current up to 5.5V.When the maximum supply current is below 80μA, the device can deliver high efficiency.250mA is the maximum amount of current that can be supplied to the load.It is capable of fulfilling its full functionality when the switching frequency remains at 725kHz.No external factors cause 60μA current to be consumed.
LM2753SD/NOPB Features
Available in the 10-WFDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.6V
Switching frequency of 725kHz
LM2753SD/NOPB Applications
There are a lot of Texas Instruments LM2753SD/NOPB LED Driver ICs applications.
- Street lighting
- Architectural lighting
- White LED Backlight for portable equipment
- High-end retail lighting
- Linear fluorescent
- Auxiliary lights for on-vehicle cameras
- A- lamps
- Amusement Machines
- LED Lighting PFCs, Linear Dimmable
- Down lighting
