LM2901MX
| Parameters | |
|---|---|
| Quiescent Current | 2.5mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.25μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 7mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 16mA @ 5V |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 760mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | LM2901 |
| Pin Count | 14 |
| Output Type | CMOS, DTL, ECL, MOS, Open-Collector, TTL |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 2mA |
| Power Dissipation | 760mW |
| Output Current | 16mA |
| Max Supply Current | 2mA |
LM2901MX Overview
In order to make transportation easier, it is packaged in 14-SOIC (0.154, 3.90mm Width) .The comparator has a type CMOS, DTL, ECL, MOS, Open-Collector, TTL output.We ship the part through Tape & Reel (TR) .You can find 14 terminals of the comparator.The component belongs to the Comparator family of electrical components.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .This is a typical comparator of type General Purpose .The total number of elements is 4 .There are 14 pins on this board.Electronic comparator is recommended to mount using type Surface Mount .Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.14 pins are present on the comparator.In case you are looking for more pin-to-pin solutions, you may want to search LM2901 .A quiescent current of 2.5mA is observed in this comparator.There is a Surface Mount for mounting it on a PCB or other board.The nominal supply current of the device should be 2mA for normal use.A supply current exceeding 2mA may result in the comparator malfunctioning.This device requires 5V power supplies to operate.Electronic comparator is possible to input up to 250nA current into the device.Comparator electronics is clear from the voltage formula that the voltage gain of the part is 100dB .Comparator electronics is acceptable to pack the device by TR .
LM2901MX Features
CMOS, DTL, ECL, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 2.5mA
Voltage Gain: 100dB
LM2901MX Applications
There are a lot of Texas Instruments LM2901MX linear comparators applications.
- DC/DC and AC/DC power supplies
- Self-diagnostics
- Portable Battery Monitoring
- Infotainment and Clusters
- Power Supervision
- Consumer Medical Electronics
- Infotainment & cluster
- Multivibrators and High-Voltage Digital Logic Gates
- Motor drives
- Lithium ion battery monitoring
