LM2902N

4 Channels 60mA per Channel 20nA 50 dB Instrumentational OP Amps 0.5μA 13V 3V~26V ±1.5V~13V LM2902 14 Pins 14-DIP (0.300, 7.62mm)

Manufacturer: Texas Instruments
Nocochips NO: 815-LM2902N
Package: 14-DIP (0.300, 7.62mm)
Datasheet: -
Stock: 295
Description: 4 Channels 60mA per Channel 20nA 50 dB Instrumentational OP Amps 0.5μA 13V 3V~26V ±1.5V~13V LM2902 14 Pins 14-DIP (0.300, 7.62mm)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Contact Plating	Gold
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	14-DIP (0.300, 7.62mm)
Number of Pins	14
Weight	113.398093g
Operating Temperature	-40°C~125°C
Packaging	Tube
JESD-609 Code	e3
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Subcategory	Operational Amplifier
Technology	BIPOLAR
Terminal Position	DUAL
Number of Functions	4
Supply Voltage	5V
Base Part Number	LM2902
Pin Count	14
Operating Supply Voltage	13V
Power Supplies	+-1.5/+-13/3/26V
Number of Channels	4
Operating Supply Current	1.4mA
Nominal Supply Current	3mA
Output Current	30mA
Max Supply Current	700μA
Slew Rate	0.5V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	50 dB
Current - Input Bias	20nA
Voltage - Supply, Single/Dual (±)	3V~26V ±1.5V~13V
Output Current per Channel	60mA
Input Offset Voltage (Vos)	7mV
Bandwidth	1.2MHz
Unity Gain BW-Nom	1200 kHz
Voltage Gain	100dB
Average Bias Current-Max (IIB)	0.5μA
Power Supply Rejection Ratio (PSRR)	50dB
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	26V
Voltage - Input Offset	3mV
Low-Bias	NO
Micropower	YES
Bias Current-Max (IIB) @25C	0.25μA
Programmable Power	NO
Dual Supply Voltage	9V
Input Offset Current-Max (IIO)	0.3μA
Height	5.08mm
Length	19.3mm
Width	6.35mm
Thickness	3.9mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

LM2902N Overview

It is packaged in an 14-DIP (0.300, 7.62mm)-case that protects the operational amplifiers from damage. This is a General Purpose type op amp. Linear amplifier is delivered in a Tube case. The number of terminations is approaching the 14 mark. There are a total of 14 pins on this op amp. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. In total, the buffer amplifier consists of 14 pins. Regarding input offset voltage, op amp rates 7mV. This electrical part should be mounted using type Through Hole. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . It is possible to operate this buffer amplifier from a supply current of 1.4mA . Voltage gain should remain at 100dB. There are a total of 4 channels available on the op amps. The operating supply voltage of the buffer op amp is rated at 13V.