LM2902Q4T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM2902 |
| Operating Supply Voltage | 15V |
| Number of Elements | 4 |
| Power Supplies | +-1.5/+-15/3/30V |
| Operating Supply Current | 1.5mA |
| Nominal Supply Current | 1.2mA |
| Output Current | 40mA |
| Slew Rate | 0.4V/μs |
| Architecture | VOLTAGE FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 20nA |
| Voltage - Supply, Single/Dual (±) | 3V~30V ±1.5V~15V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 1.3MHz |
| Unity Gain BW-Nom | 1300 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.3μA |
| Low-Offset | NO |
| Frequency Compensation | NO |
| Supply Voltage Limit-Max | 33V |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.15μA |
| Programmable Power | NO |
| Screening Level | AEC-Q100 |
| Power | NO |
| Height Seated (Max) | 1mm |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM2902Q4T Overview
In order to protect the op amps, a 16-VFQFN Exposed Pad case is used. An op amp of this type is a General Purpose-type. A Tape & Reel (TR) case is used to deliver the buffer op amp. We are approaching the 16h termination of the year. It is important to remember that this op amp should be operated at a voltage of 5V volts. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. It has 16 pins that make up the linear amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 2mV. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. This op amp can operate from a supply current at 1.5mA. Voltage gain should remain at 100dB. There are 4 elements in this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 15V. The linear amplifier is packaged by using a TR axis.
LM2902Q4T Features
supply voltage of 5V
100dB voltage gain
LM2902Q4T Applications
There are a lot of STMicroelectronics LM2902Q4T Instrumentational OP Amps applications.
- Computer workstations
- Switching amplifier
- High gain DC amplifier
- Gaming industry
- Weighing systems
- Integrator circuits
- Multiplication circuits
- Active probe
- Signal amplification
- Radar
