LM2903QDRQ1
| Parameters | |
|---|---|
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Differential |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | LM2903 |
| Pin Count | 8 |
| Output Type | CMOS, MOS, Open-Collector, TTL |
| Operating Supply Voltage | 28V |
| Number of Elements | 2 |
| Power Supplies | 5/30V |
| Nominal Supply Current | 1mA |
| Output Current | 20mA |
| Max Supply Current | 400μA |
| Quiescent Current | 2.5mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.05μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Dual Supply Voltage | 9V |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
LM2903QDRQ1 Overview
Electronic comparator is packaged in 8-SOIC (0.154, 3.90mm Width) for convenient transportation.Output type CMOS, MOS, Open-Collector, TTL is used for this comparator.The part is shipped by Cut Tape (CT) .You can find 8 terminals of the comparator.Electronic comparator is a component of the Comparator family.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.When it comes to types, this comparator is a typical Differential .This element consists of 2 elements in total.The device includes 8 pins.Electronic comparator is recommended that the mounting type be Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~125°C to prevent malfunctions.8 pins are available on the comparator.If you require more pin-to-pin solutions, search LM2903 for more options.There is a quiescent current of 2.5mA in this comparator.Electronic comparator has a Surface Mount for mounting on PCB or other boards.Electronic comparator is recommended that the nominal supply current be 1mA in order to use the device normally.An excess of current supply over 400μA could result in malfunction of the comparator.The device can be run with 5/30V power supplies.A maximum current of 250nA can be supplied to the device.A voltage gain of 100dB can be determined from the voltage formula for the part.A comparator part from the Automotive, AEC-Q100 series is used in this part.For normal operation, there should be 28V operating supply voltage applied.The device is packed in TR and is intended for general use (as an element in the ADC circuit).
LM2903QDRQ1 Features
CMOS, MOS, Open-Collector, TTL output capability
Differential IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 2.5mA
Voltage Gain: 100dB
LM2903QDRQ1 Applications
There are a lot of Texas Instruments LM2903QDRQ1 linear comparators applications.
- High-Speed Sampling Circuits
- General-Purpose, Low-Voltage Applications
- Window Comparators, Multivibrators
- Motor drives
- Window Comparators
- Mobile Communications
- Portable Battery Monitoring
- General Purpose Low Voltage Applications
- Multivibrators and High-Voltage Digital Logic Gates
- Body Control Modules
