LM293DGKR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Weight | 18.99418mg |
| Operating Temperature | -25°C~85°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Differential |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 660mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM293 |
| Pin Count | 8 |
| Output Type | CMOS, MOS, Open-Drain, TTL |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 1mA |
| Output Current | 20mA |
| Max Supply Current | 500μA |
| Quiescent Current | 2.5mA |
| Response Time | 300 ns |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.05μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 5mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM293DGKR Overview
A convenient transport package is provided in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .There is a CMOS, MOS, Open-Drain, TTL output type for this comparator.This chip is designed with the Cut Tape (CT) package.The comparator has 8 terminals.Electronic comparator is a part of Comparator family.With a 5V voltage supply, the comparator can perform multiple demanding tasks.Speaking of types, this is a typical Differential comparator.There are a total of 2 elements in it.As a result, it contains 8 pins.Electronic comparator is recommended to mount using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to -25°C~85°C in order to prevent malfunctions.The comparator consists of 8 pins.In case you are looking for more pin-to-pin solutions, you may want to search LM293 .There is 2.5mA current flowing in this comparator.The PCB or other board can be mounted using the Surface Mount on it.Normally, the nominal supply current should be 1mA when using the device.An excess of current supply over 500μA could result in malfunction of the comparator.There is sufficient power to run the device from 5V power supplies.The maximal current your can input into the device is 250nA .Comparator electronics follows that the voltage gain of the part is 106.02dB .The device is packaged in TR and is often used in ADC circuits.
LM293DGKR Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under -25°C~85°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM293DGKR Applications
There are a lot of Texas Instruments LM293DGKR linear comparators applications.
- Infotainment & cluster
- Automatic Test Equipment
- Window Comparators
- Ultra-Low Power Systems
- Current and voltage sensing
- Point of load regulators
- Multivibrators and High-Voltage Digital Logic Gates
- Analog front end
- General-Purpose, Low-Voltage Applications
- High-Speed Differential Line Receiver
