banner_page

LM306D

Surface Mount Tube 100nA mA 28 ns μs Linear Comparators 92.04dB dB 40μA pA 10mA μA 5mV mV Surface Mount


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-LM306D
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 600
  • Description: Surface Mount Tube 100nA mA 28 ns μs Linear Comparators 92.04dB dB 40μA pA 10mA μA 5mV mV Surface Mount (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 day ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Weight 72.603129mg
Operating Temperature 0°C~70°C
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Differential
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Comparator
Max Power Dissipation 600mW
Technology BIPOLAR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 12V
Base Part Number LM306
Pin Count 8
Output Type Push-Pull, TTL
Number of Elements 1
Nominal Supply Current 10mA
Power Dissipation 600mW
Output Current 100nA
Max Supply Current 10mA
Quiescent Current 10mA
Response Time 28 ns
Voltage - Supply, Single/Dual (±) ±7.5V~12V
Output Current per Channel 100mA
Input Offset Voltage (Vos) 5mV
Neg Supply Voltage-Nom (Vsup) -12V
Voltage Gain 92.04dB
Average Bias Current-Max (IIB) 25μA
Dual Supply Voltage 9V
Input Bias Current 40μA
Voltage - Input Offset (Max) 5mV @ ±12V
Current - Input Bias (Max) 40μA @ ±12V
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

LM306D Overview


In order to facilitate transportation, it is packaged in 8-SOIC (0.154, 3.90mm Width) .There is a Push-Pull, TTL output type for this comparator.This device is designed in Tube case.Electronic comparator is possible to find the 8 terminals of the comparator.The electrical component in this case belongs to the Comparator family.When supplied with 12V voltage, the comparator is capable of performing a wide range of tasks.Speaking of types, this is a typical Differential comparator.A total of 1 elements can be found in it.As a result, it contains 8 pins.The recommended mounting type is Surface Mount .In order to avoid malfunctions, the operating temperature should be set to 0°C~70°C .The comparator consists of 8 pins.You can search LM306 if you are looking for more pin-to-pin solutions.In this comparator, the quiescent current is 10mA .The board has a Surface Mount for mounting on a PCB or any other board.The nominal supply current of the device should be 10mA for normal use.Current supply exceeding 10mA could cause disfunction of the compartator.Comparator electronics follows that the voltage gain of the part is 92.04dB .

LM306D Features


Push-Pull, TTL output capability
Differential IC
Employing 1 elements
Operates under 0°C~70°C
Quiescent Current: 10mA
Voltage Gain: 92.04dB

LM306D Applications


There are a lot of Texas Instruments LM306D linear comparators applications.

  • Zero-Crossing Detectors
  • Set Top Boxes
  • Security Detection Systems
  • Mobile Communications
  • Mobile Phones and Tablets
  • Infotainment and Clusters
  • Motor drives
  • Battery-Powered Electronics
  • Wide Range VCO; MOS Clock Timers
  • Wireless Base Stations

Write a review

Note: HTML is not translated!
    Bad           Good