LM311PWE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Pin Count | 8 |
| Output Type | TTL |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 3.5V |
| Nominal Supply Current | 7.5mA |
| Max Supply Current | 7.5mA |
| Current - Output | 50mA |
| Quiescent Current | 7.5mA |
| Response Time | 115 ns |
| Current - Input Bias | 300nA |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 7.5mV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.3μA |
| Max Dual Supply Voltage | 15V |
| Min Dual Supply Voltage | 1.75V |
| Bias Current-Max (IIB) @25C | 0.25μA |
| Max Input Current | 250nA |
| Length | 4.4mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
LM311PWE4 Overview
A convenient transport package is provided in TSSOP .This comparator is of the TTL output type.The device is designed with 8 terminations.The electrical component in this case belongs to the Comparator families.With a 15V voltage supply, the comparator can perform multiple demanding tasks.It's a typical General Purpose comparator.The device contains 8 pins.Electronic comparator has 8 pins.There is 7.5mA current flowing in this comparator.The PCB or other board can be mounted using the Surface Mount on it.Electronic comparator is recommended that the nominal supply current of the device be 7.5mA .A supply current exceeding 7.5mA may result in the comparator malfunctioning.Input current to the device is limited to 250nA .Comparator electronics is apparent from the voltage formula that the voltage gain for the part is 106.02dB .There is no need to exceed 70°C in terms of temperature.Lower temperatures than 0°C are unsuitable for it.A comparator's maximum supply voltage is 30V .This comparator can be supplied with a voltage as low as 3.5V .The output quality of 1 channels is maintained by cooperating with each other.Comparator electronics has a rating of 50mA output current.
LM311PWE4 Features
TTL output capability
General Purpose IC
Quiescent Current: 7.5mA
Voltage Gain: 106.02dB
LM311PWE4 Applications
There are a lot of Texas Instruments LM311PWE4 linear comparators applications.
- Pulse, Squarewave, and Time Delay Generators
- Simple Analog-to-Digital Converters (ADCs)
- Analog front end
- Portable Battery Monitoring
- Threshold Detectors
- Battery-Powered Electronics
- Infotainment and Clusters
- Set Top Boxes
- Limit Comparators
- Lithium ion battery monitoring
