LM3409QHVMY/NOPB
| Parameters | |
|---|---|
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | DC DC Controller |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Automotive |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Terminal Pitch | 0.5mm |
| Frequency | 1MHz |
| Base Part Number | LM3409 |
| Number of Outputs | 1 |
| Output Voltage | 75V |
| Operating Supply Voltage | 42V |
| Max Supply Voltage | 75V |
| Min Supply Voltage | 6V |
| Output Current | 1A |
| Max Supply Current | 2mA |
| Quiescent Current | 2mA |
| Topology | Step-Down (Buck) |
| Min Input Voltage | 6V |
| Max Input Voltage | 75V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Internal Switch(s) | No |
| Dimming | Analog, PWM |
| Number of Segments | 1 |
| Switching Frequency | 2MHz |
| Multiplexed Display Capability | NO |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
LM3409QHVMY/NOPB Overview
Save board space with 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package. LED drivers have a total of 1 outputs that are used in the design of the drivers.The mounting method adopted is Surface Mount.When it emerges as a DC DC Controller, it performs extremely well and is highly reliable.LED drivers capable of operating at -40°C~125°C TJ can be used.There are many benefits for Automotive.1MHz is the frequency in which it operates.In this case, the termination value is 10.To form its configuration, 10 pins are used.Based on our estimates, there are 1 segments.Surface Mount is mounted on it.LED drivers can be found under the base part number LM3409.75V is an acceptable voltage.Additionally, it is categorized into Display Drivers according to its characteristics.It operates with the minimal input voltage of 6V.It works with the minimal supply voltage of 6V to meet highest efficiency standards.In the case of supply current, there is a maximum value of 75V.When the maximum supply current is below 2mA, it is capable of delivering high efficiency.You can supply 1A current to the load.Powering systems requires an internal voltage of 42V.It's possible for this electronic component to fully function when the switching frequency is maintained at 2MHz.A component of the Automotive, AEC-Q100 series, this LED driver is widely used in a variety of applications.There is no external factor that consumes current when there is 2mA current consumption.75V is the voltage at the output terminal.
LM3409QHVMY/NOPB Features
Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TJ
Frequency of 1MHz
Supply voltage of 24V
Operating with the supply voltage of 42V
Switching frequency of 2MHz
Output voltage of 75V
LM3409QHVMY/NOPB Applications
There are a lot of Texas Instruments LM3409QHVMY/NOPB LED Driver ICs applications.
- Industrial LED Lighting: Image Recognition Devices
- Down lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- LED headlights
- OLED power supply for portable equipment
- Scanners and Handy Terminals
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Sports Facility Lighting
- Down lights
- General lighting
