LM3410YSD/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-WDFN Exposed Pad |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight |
| Max Power Dissipation | 400mW |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 525kHz |
| Base Part Number | LM3410 |
| Number of Outputs | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Power Dissipation | 400mW |
| Output Current | 1.5A |
| Max Supply Current | 7mA |
| Quiescent Current | 3.4mA |
| Voltage - Output | 3V~24V |
| Topology | SEPIC, Step-Up (Boost) |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 2.8A Switch |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 5 |
| Switching Frequency | 550kHz |
| Voltage - Supply (Min) | 2.7V |
| Multiplexed Display Capability | NO |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 800μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3410YSD/NOPB Overview
To save space on the board, it has a 6-WDFN Exposed Pad package. LED drivers design with 1 outputs.It is mounted using Surface Mount.In this case, the result is a DC DC Regulator with high efficiency.This LED driver can be operated at a temperature of -40°C~125°C TJ. Backlight has many benefits.A frequency of 525kHz is used as the basis for operation.The operation of this system is supported by 6 terminations.The LED light driver is configured with a base of 0 pins.It is inevitable that there will be undetermined failures when the supply voltage is less than 2.7V.5 segments exist.The device has been mounted on the Surface Mount.It's under the LM3410 base part number.Ideally, the supply voltage should be 5.5V.In this device, the output voltage is 3V~24V volts.In order to achieve the highest efficiency, it is designed to operate at a low voltage of 2.7V.It is capable of delivering high efficiency when the maximal supply current is below 7mA.In this case, the load can only be supplied with 1.5A current.Electronic components can function properly when their switching frequency is set to 550kHz.There is no external factor that consumes current when there is 3.4mA current consumption.
LM3410YSD/NOPB Features
Available in the 6-WDFN Exposed Pad package
Operating temperature of -40°C~125°C TJ
Frequency of 525kHz
Supply voltage of 5V
Switching frequency of 550kHz
LM3410YSD/NOPB Applications
There are a lot of Texas Instruments LM3410YSD/NOPB LED Driver ICs applications.
- Portable lighting
- LED headlights
- Amusement Machines
- LED Lightings for Inspection Devices
- Gallery lighting
- LED Lightings for Industrial Equipment
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Sports Facility Lighting
- Stage Lighting and Signage
- Architectural lighting
