LM3444MM/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | AC DC Offline Switcher |
| Applications | Lighting |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Frequency | 1MHz |
| Base Part Number | LM3444 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Output Voltage | 60V |
| Max Supply Voltage | 13V |
| Min Supply Voltage | 8V |
| Output Current | 100mA |
| Max Supply Current | 2.25mA |
| Quiescent Current | 1.58mA |
| Topology | Step-Down (Buck) |
| Min Input Voltage | 8V |
| Max Input Voltage | 13V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Internal Switch(s) | No |
| High Level Output Current | -770mA |
| Low Level Output Current | 880mA |
| Dimming | Analog |
| Number of Segments | 1 |
| Switching Frequency | 1MHz |
| Multiplexed Display Capability | NO |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3444MM/NOPB Overview
The 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package conserves board space. LED drivers with this design have 1 outputs.The led driver mounting is done by using Surface Mount.It emergys as a AC DC Offline Switcher with high efficiency and reliable performance.If the led driver ic is set to -40°C~125°C TJ, it will work normally.The benefits of Lighting are considerable.A frequency of 1MHz is used as the basis for operation.In this case, the terminations are set to 10.There are 10 pins used to form the base of its configuration.The number of segments is estimated to be 1.It has been mounted on Surface Mount.LED drivers have a base part number of LM3444.The voltage of 13V can be supplied.10 pins are included in it.In addition to Display Drivers, [1] is assigned in accordance with its characteristics.A voltage of 8V is its minimal input voltage.A minimum supply voltage of 8V is required to meet the highest efficiency standards.It reaches 13V when the maximum supply current is allowed.If the maximum current supply is less than 2.25mA, this device provides high efficiency.100mA is the maximum current the load can handle.Having the switching frequency at 1MHz enables this electronic component to perform at its best.There is no external factor that can consume current, so 1.58mA current is consumed.The voltage at the output terminal is 60V.
LM3444MM/NOPB Features
Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package
Operating temperature of -40°C~125°C TJ
Frequency of 1MHz
Supply voltage of 12V
Switching frequency of 1MHz
Output voltage of 60V
LM3444MM/NOPB Applications
There are a lot of Texas Instruments LM3444MM/NOPB LED Driver ICs applications.
- General lighting
- White LED Backlight for portable equipment
- LED Lightings for Inspection Devices
- Down lights
- OLED power supply for portable equipment
- Flicker-free LED Lighting using R1580N
- Scanners and Handy Terminals
- Down lighting
- Stage and Studio lighting
- Industrial LED Lighting: Image Recognition Devices
