LM34902ITMX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-WFBGA, DSBGA |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 640mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LM34902 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 300mA |
| Supply Voltage-Max (Vsup) | 5.3V |
| Supply Voltage-Min (Vsup) | 2.8V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Quiescent Current | 47μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.8V~5.3V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 640m Ω |
| Height | 675μm |
| Length | 0m |
| Width | 0m |
| Thickness | 420μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM34902ITMX/NOPB Overview
A Tape & Reel (TR) is used to package it.This file is included in package 6-WFBGA, DSBGA.The mounting type of the LED driver is Surface Mount.General Purpose is the switch type that it owns.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.The lighting driver is equipped with 1 outputs that can be used.With a supply voltage of Not Required, the LED driving board operates.Voltage output is N-Channel volts at maximum.Currently, the LED driving board is equipped with Status Flag features.I believe it belongs to the LM34902 family.As a result, there are 6 terminations.In order to operate, 6 pins are used.As far as functions are concerned, the lighting driver has 1.The maximum output current is reduced to 300mA to meet the operation criteria.The supply voltage can be 3V for high efficiency.It is mounted in the way of Surface Mount.640mOhm resistance is present in the lighting driver.The LED driver is configured with a maximum supply voltage of 5.3V (Vsup).In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 2.8V.This LED driving board uses an analog IC POWER SUPPLY SUPPORT CIRCUIT.There are a total of 1 channels available.
LM34902ITMX/NOPB Features
Supplied from 3V
Resistance of 640mOhm
1 channels
LM34902ITMX/NOPB Applications
There are a lot of Texas Instruments LM34902ITMX/NOPB Power Switches ICs applications.
- Various applications equipped with buttons
- HDD, SSD
- Mobile Communication Devices
- Portable GPS Device
- USB Power Distribution
- Wireless/Networking Cards
- Hot-Swap Systems
- Hard Disk Drives
- USB Ports/Hubs
- Portable Video Game Players
