LM3526M-L/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 700mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | LM3526 |
| Pin Count | 8 |
| Output Voltage | 6V |
| Output Type | P-Channel |
| Interface | On/Off |
| Current - Output (Max) | 500mA |
| Number of Ports | 2 |
| Nominal Supply Current | 1μA |
| Output Configuration | High Side |
| Power Dissipation | 700mW |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Quiescent Current | 1μA |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Output Characteristics | OPEN-DRAIN |
| Nominal Input Voltage | 5V |
| Ratio - Input:Output | 1:2 |
| Input Characteristics | STANDARD |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Input Current | 115μA |
| Output Peak Current Limit-Nom | 1.2A |
| Rds On (Typ) | 100m Ω |
| USB | USB 1.1 |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3526M-L/NOPB Overview
It's?packaged?in?the way?of?a?Tube.There is a package for it in the 8-SOIC (0.154, 3.90mm Width) package.A Surface Mount mounting is used for the LED driving board.It owns the USB Switch switch type.It is best to set the temperature to -40°C~125°C TJ to ensure reliable operation.A supply voltage of Not Required is required for it to operate.It has a maximum output voltage of P-Channel volts.As far as features are concerned, the LED driving board has Status Flag.I believe it belongs to the LM3526 family.A total of 8 terminations have been recorded.For operation, 8 pins are used.As far as the lighting driver is concerned, there are 1 functions.The maximum output of the LED driving board is 500mAV.The supply voltage can be 5V for high efficiency.It is positioned in the direction of Surface Mount.8 pins are connected to it in total.This case results in a 500mA output current.Voltage input is limited to 5.5V volts.A minimum input voltage of 2.7V volts is required for this LED driver.
LM3526M-L/NOPB Features
Supplied from 5V
LM3526M-L/NOPB Applications
There are a lot of Texas Instruments LM3526M-L/NOPB Power Switches ICs applications.
- Notebook and Tablet Computers
- Portable Music Players
- USB Protection
- Wearable Devices
- Hot-Swap Systems
- Mobile Communication Devices
- Handheld Devices
- Storage (HDDs, SSDs)
- Various applications equipped with buttons
- Portable GPS
