LM3544MX-L
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Feature | Status Flag |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | LM3544 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Quiescent Current | 1μA |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Supply Current-Max (Isup) | 0.8mA |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 90m Ω |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM3544MX-L Overview
As a result, it is packaged in the form of a Tape & Reel (TR).It is included with the 16-SOIC (0.154, 3.90mm Width) package as well.The lighting driver has the mounting type Surface Mount.It owns USB Switch switch type.The temperature should be set to -40°C~125°C TJ to ensure reliable functioning.There is a default setting of 4 for output.A supply voltage of Not Required is required for it to operate.It has a maximum output voltage of N-Channel volts.There are Status Flag features available on the LED driving board.It comes under the family of LM3544.It consists of 16 terminations in total.The operation is carried out using the 16 pins.The LED driving board has a total of 2 functions.Using a voltage of 5V allows for high efficiency.It is positioned in the direction of Surface Mount.There are 16 pins in total on this board.The output current is set to 500mA in this case.It is self-contained in an econtainer with a capacity of Power Management Circuits.The Vsup value (maximum supply voltage) is set to 5.5V.In order to operate normally, the supply voltage (Vsup) must be maintained above 2.7V.This LED driving board uses an analog IC POWER SUPPLY SUPPORT CIRCUIT.You can select from 2 channels.This part has a power supply of 5V.Through the use of this lighting driver, we can also produce UNDERVOLTAGE LOCKOUT.0.8mA is the maximum operating current.
LM3544MX-L Features
Supplied from 5V
2 channels
Additional features like UNDERVOLTAGE LOCKOUT
LM3544MX-L Applications
There are a lot of Texas Instruments LM3544MX-L Power Switches ICs applications.
- HDD, SSD
- Notebook PC
- Storage (HDDs, SSDs)
- Set-top-box
- Low Voltage I/O System Power
- Solid State Drivers
- Gaming
- Portable Video Game Players
- Hot Swaps
- PC Card Hot Swap
