Parameters |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm) |
Surface Mount |
NO |
Number of Pins |
8 |
Weight |
4.535924g |
Operating Temperature |
0°C~70°C TA |
Packaging |
Tube |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
ECCN Code |
EAR99 |
Type |
Class AB |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Subcategory |
Audio/Video Amplifiers |
Max Power Dissipation |
1.25W |
Technology |
BIPOLAR |
Voltage - Supply |
4V~12V |
Terminal Position |
DUAL |
Number of Functions |
1 |
Terminal Pitch |
2.54mm |
Base Part Number |
LM386 |
Pin Count |
8 |
Output Type |
1-Channel (Mono) |
Supply Voltage-Min (Vsup) |
4V |
Number of Channels |
1 |
Nominal Supply Current |
4mA |
Power Dissipation |
1.25W |
Quiescent Current |
8mA |
Output Power |
325mW |
Supply Type |
Single |
Input Offset Voltage (Vos) |
2.5mV |
Bandwidth |
300 kHz |
Gain Bandwidth Product |
300 kHz |
Voltage Gain |
46dB |
Power Supply Rejection Ratio (PSRR) |
50dB |
Max Output Power |
325mW |
Input Bias Current |
250nA |
Max Output Power x Channels @ Load |
325mW x 1 @ 8 Ω |
Harmonic Distortion |
10% |
Number of Amplifiers |
1 |
Load Impedance |
8Ohm |
Height |
3.3mm |
Length |
9.27mm |
Width |
6.35mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
LM386N-1 Overview
The device is embedded in 8-DIP (0.300, 7.62mm) .This device is packaged in the way of Tube .Amp parts is configured wAmp partsh an output of 1-Channel (Mono) .There is Class AB type of electrical device associated with this device.There are 8 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. Amp parts is mounted in front of Through Hole .The supply voltage of this electrical device is 4V~12V .1 channels are present on the device.Ideally, the operating temperature should not exceed 0°C~70°C TA .A total of 8 pins are present on the device.Audio/Video Amplifiers contains it.Amp parts is included in the LM386 family.In this electronic part, the output power is a maximum of 325mW kWh per hour.A normal operation requires a supply voltage (Vsup) above 4V .Electronic parts with Single supply types are available.There is 8mA external influence on the consumption of quiescent current: it consumes 8mA of quiescent current. 1 amplifiers are electronic devices that increase a signal's voltage, current, or power.
LM386N-1 Features
8-DIP (0.300, 7.62mm) package
8 pin count
LM386 family
325mW kWh per hour
LM386N-1 Applications
There are a lot of Texas Instruments LM386N-1 audio amplifiers applications.
- Proportional operation circuits
- Addition and subtraction operation circuits
- Industrial control system
- Communication
- Radar
- Semiconductor detectors
- Vehicle electronics
- Power transmission
- Test and measurement instruments
- Professional videography