LM392DGKT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Amplifier, Comparator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Applications | Transducer Amplifier |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM392 |
| Pin Count | 8 |
| Operating Supply Voltage | 16V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 2 |
| Nominal Supply Current | 2mA |
| Output Current | 40mA |
| Architecture | VOLTAGE-FEEDBACK |
| Common Mode Rejection Ratio | 65 dB |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 1MHz |
| Gain Bandwidth Product | 1MHz |
| Unity Gain BW-Nom | 1000 kHz |
| Average Bias Current-Max (IIB) | 0.4μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | NO |
| Min Dual Supply Voltage | 1.5V |
| Programmable Power | NO |
| Input Bias Current | 400nA |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.05μA |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM392DGKT Overview
The package consists of a Tape & Reel (TR) shape.The Amplifier, Comparator offers excellent value for money.I have sent it along with the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package.During the mounting process, the part is mounted in the Surface Mount direction.Its primary application is Transducer Amplifier.This device was designed with a LM392 as the base part number.Here, 2 functions are used in order to access high performance for purposes of amplification.It is worth noting that there are 8 terminals in total, each having its own function.During the peak relow process, the iron temperature must be controlled under 260 when the peak relow for the part is being carried out.There are total of 8 pins in this part.The amplifier runs best at a supply voltage of 5V, as a minimum supply voltage of 5V is recommended.This is a 8-pin amplifier that can be used for any custom application you may have.In order to operate efficiently, the device can withstand temperatures as low as 0°C.Interestingly, this part can run at temperatures up to 70°C.Using Surface Mount as a component of this product will allow it to provide greater design flexibility.Having the same advantage as other high-quality Operational Amplifier's, it also has the capacity to make wonderful amplifying sounds.Video processing devices such as this one combine 2 channels in order to achieve remarkable performance.This device can be supplied using 16V.
LM392DGKT Features
LM392DGKT Applications
There are a lot of Texas Instruments LM392DGKT Special Purpose Amplifiers applications.
- Multiplication and division circuits
- Multimedia playback equipment
- Band-pass filter
- Signal amplification
- Car stereo
- Large motor controllers
- Hand-held batteries
- Blood pressure sensors
- Information processing
- High-frequency data acquisition systems
